Bea Type Beam Safety Photocell

Bea Beam safety sensor








Technical data RMS-M
General specifications
Function principle Micro wave module
Detection speed min. 0.1 m/s
Marking CE
Setting angle 0...40 ° In 5 ° Steps
Sensing range 1500x 3500 mm (TxB) at 2200 mm mounting height and 30° Tilt angle
Operating frequency 24.05...24.25 GHz K-Band
Operating mode Radar motion sensor
Indicators/operating means
Function display LED red/green (see section "functional display")
Operating elements Potentiometer and programming button for setting: Method of connection, dropout time,
Response time, Interference behavior
Operating elements sensitivity adjuster
Electrical specifications
Operating voltage 12...36 V DC, 12...28 V AC
No-load supply current I0 ≤ 50 mA at 24 V DC
Power consumption P0 ≤ 1 W
Output
Switching type active/passive
Signal output relay
Switching voltage 120 V AC / 60 V DC
Switching current max. 1 A
Standard conformity
Standards EN 60950: 2000; EN 60335-1: 1994; EN 301489-3 V1.4.1; EN 61000-6-1: 2001, EN 61000-
6-2: 2001; EN 61000-6-3: 2001; EN 61000-4: 2001; EN 300440-2 V1.1.1
Standards 2 CETECOM
Ambient conditions
Ambient temperature -20...60 ° C (253...333 K)
Relative humidity max. 90 % non-condensing
Mechanical specifications
Mounting height max. 4000 mm
Protection degree IP54
Connection terminal strip 4-pin
Material
Housing ABS, anthracite