Audited Supplier
BDF-CTA016
Normal Pressure Transmitter
Ceramic Pressure Transmitter
Liquid
±1.0%F.S
0~16 Bar
IP67
CE
Non-Customized
1.5*Pressure Range
3.0*Pressure Range
-40 Celsius Degree- 100 Celsius Degree
-10celsius Degree-80 Celsius Degree
Corrosive Medium Compatible with 1cr 18ni9ti
Three Wires/0-16bar
4-20mA
Three Wires/+24VDC
(U-10)/0.02 Ohm/4-20mA
≥ 100kohm
BEDFORD
Cartons
6Bar/10Bar/16Bar/25Bar/40Bar
Guangzhou, China
9026201090
Product Description
Introduction
BDF-CTA is high reliable pressure transmitter produced by high stable
piezo-resistive pressure sensor and special amplifier circuit.The transmitter
is widely used for various pressure measurement application.The media should be compatible with stainless
steel and fluororubber.
Features
- Reliable performance, easy application
- Short protection and reverse polarity protection
- Measure gauge, absolute and sealed gauge
Specification
- Pressure range:-0.1…0 ~ 0.01…60MPa
- Overpressure: 1.5 times FS
- Pressure type: gauge/ absolute / sealed gauge
- Process connection: G1/2 male / G1/4 male/ M20x1.5 male
- Non-linearity: 0.25% FS
- Temperature error:
- Typical: ≤±0.5%FS of span (at 0 ~ 70ºC ) Maximum: ≤±1%FS of span (at 0 ~ 70ºC ) Maximum: ≤±2%FS of span (at -20 ~ 85ºC )
- Long term stability: max. ±0.3%FS/year
- Application temp: -20 ~ 85ºC
- Storage temp: -40 ~ 100ºC
- Power supply: 8 ~ 28VDC
- Output signal: 4 ~ 20mADC,0.5 ~ 4.5VDC
- • Load: ≤(U-8)/0.02Ω(2-wire),≥10k(3-wire)
- Housing protection:IP65
Construction material
- Housing: stainless steel
- Sensor housing: stainless steel
- Diaphragm: stainless steel 316L
- Sensor O-ring: Fluororubber
- Plug housing: plastic
Electric Connection
| Pin | 2-wire | 3-wire |
| 1 | +V | +V |
| 2 | +OUT | GND |
| 3 | Null | +OUT |
Model Selection For Regular Stock
| Thread Type 4-20mA | Screw Type 4-20mA |
| BDF-CTA006 Max.6 Bar/0.6Mpa | |
| BDF-CTA010 Max.10 Bar/1.0Mpa | |
| BDF-CTA016 Max.16 Bar/1.6Mpa | BDF-CTA025 Max.25 Bar/2.5Mpa |
Thread Type Picture for reference
Screw Type Picture for reference
