Audited Supplier
- The main raw material of EPS/SEPS is expandable polystyrene particles, they through steam pre-foaming, plate molding, be cut and finally as a molding insulation material.
- Molded polystyrene (EPS/SEPS) insulation board is a kind of insulation material with excellent insulation performance, flame retardant, environmental protection, cost-effective.
| Beipeng SEPS Foam Board Specification | ||||||||||
| Thermal Conductivity | W/m2·K | ≤0.041 | ||||||||
| Dimensional stability | % | ≤3 | ||||||||
| Compressive strength | kPa | ≥100 | ||||||||
| Tensile strength | Mpa | ≥0.10 | ||||||||
| Water absorption | % | ≤4 | ||||||||
| Combustion performance | B1, B2 | |||||||||
| Density | kg/m2 | 16-30 | Customization is accaptable | |||||||
| Length | mm | 1200 | 2400 | |||||||
| Width | mm | 600 | 1200 | |||||||
| Thickness | mm | 20 25 | 30 40 | 50 60 | 70 80 | 90 100 | 120 130 | |||
With domestic advanced automation production equipment, Germany pruducing line imported high quality raw materials and as Germany designated production units, Beipeng® molded polystyrene insulation board has the following excellent characteristics:
1. High-quality raw materials.
2. High thermal resistance, low thermal conductivity and good dimensional stability.
3. Environmental protection flame retardant and uniform dispersion, product flame retardant performance, slow attenuation.
4. High degree of automation, fine quality control, complete specifications and varieties.
Wall insulation:
1) Thin plastering external insulation system
2) Ultra-low energy consumption building wall insulation
Underground insulation:
1) Lightweight backfill
Temperature retaining core material:
1) PC-component exterior wall panel of prefabricated building
2) Integrated system temperature retaining core material
3) Insulation car
Special application:
1) Food and pharmaceutical packaging
2) Shock absorbing packaging
1. Beipeng extruded board process-CO2 foaming process
2. The cells are small and uniform in size
3. The link wall between the cells is uniform in thickness
4. High closed cell rate
5. No secondary foaming phenomenon6. No residual solids and no foaming
