Audited Supplier
Beipeng lightweight partition board is material of a kind of new-type energy saving wall structure. It is a kind of wall material like hollow floor, only need to be coated with a small amount of caulking mortar when do installation. It is composed of harmless phosphogypsum, light steel slag, fly ash and other industrial waste slag, by frequency conversion steam pressure curing. Lightweight partition board has the advantages of light weight, high strength, multiple environmental protection, heat preservation and insulation, sound insulation, respiratory humidity control, fire prevention, rapid construction, reduce wall cost and so on.
Only one-eighth the weight of solid brick wall, achieve C30 strength, thermal conductivity is a third of the solid brick wall, and the acoustic conductivity is only one quarter of the solid brick wall. The product can adjust the indoor air humidity, save the land occupied by industrial waste residue, put an end to the pollution of industrial waste residue to the air and water, save 15% to 20% of the wall cost, and improve the construction efficiency three to five times.
1. Residential buildings, hotels, office buildings and other commercial buildings.
These buildings are characterized by more indoor compartments and more unified internal grids. HFC reinforced
foamed concrete slab wall thin, can increase the practical area.
2. Workshop, warehouse and other buildings.
This kind of building requires low wall material cost and short construction period. Color steel plate was once a
good choice but it is low strength, short service life, poor fire performance.
3. Schools, hospitals and other public buildings.
This kind of building often pays attention to the insulation, sound insulation, fire prevention and seismic
performance of the wall material, and HFC reinforced foamed concrete slats can fully meet the requirements.
1. Independently developed the formula of HFC reinforced foamed concrete slab
2. Bending bearing heigh (≥1.5), good sound insulation effect (≥35dB), strong hanging force (>1000N)
3. Low expansion, permanent no cracking, no radioactivity A class products
4. Precast internal partition wall and pipeline integration, no need to slot in the precast internal partition wall installation (and wet work decoration)
5. Additional points for prefabricated PC building/prefabricated steel/Structure building
