Audited Supplier
- PIR insulation board is based on polyethylene polyphenol isocyanate (black material), polyether polyol (white material) as the main raw material, through the chemical foaming formed thermal insulation material.
- PIR insulation board is a kind of environmentally friendly high-end insulation material with low thermal conductivity, high flame retardant and wide temperature.
| Beipeng PIR Foam Board Specification | ||||||||||
| Thermal Conductivity | W/m2·K | ≤0.024 | ||||||||
| Dimensional stability | % | ≤1.0 | ||||||||
| Compressive strength | kPa | ≥150 | ||||||||
| Tensile strength | Mpa | ≥0.10 | ||||||||
| Water absorption | % | ≤3 | ||||||||
| Combustion performance | B1, B2 | |||||||||
| Density | kg/m2 | ≥30 | ||||||||
| Length | mm | 1200 | 2400 | Customization is accaptable | ||||||
| Width | mm | 600 | 1200 | |||||||
| Thickness | mm | 20 25 | 30 40 | 50 60 | 70 80 | 90 100 | 120 130 | |||
Beipeng polyurethane insulation board is the introduction of mature technology formula, fluorine-free foaming technology. Using the polyurethane foaming equipment of Italian OMS company, the automatic continuous board production line. High-end polyurethane with high quality, good flame retardancy, green and environmental protection
Wall insulation:
1) Thin plastering external insulation system
2) Single-sided composite plasterboard external wall insulation system
3) Ultra-low energy consumption building wall insulation
Roof insulation:
1) concrete standing roof system, concrete cold storage roof
2) Steel structure flexible roof system, steel structure cold storage roof
Temperature retaining core material:
1) PC-component exterior wall panel of prefabricated building
2) Integrated system temperature retaining core material
3) Decorative insulation integrated system core material
4) Central air conditioning ventilation pipe5) Subway carriage air conditioning ventilation pipe
1. Beipeng extruded board process-CO2 foaming process
2. The cells are small and uniform in size
3. The link wall between the cells is uniform in thickness
4. High closed cell rate
5. No secondary foaming phenomenon
6. No residual solids and no foaming
