Audited Supplier
CEMA DIN AFNOR JIS FEM BS
Carbon Steel
Baking Paint
Frequency Control Motor
Multi-Layer
Drive/Head/Tail/Snub/Take up/Bend/Return
315/400/500/630/800/1000/1250/1400/1600
Ceramic/Smooth/Diamond/Herringbone/Polyurethane
Hot Vulcanized and Cold Adhesive
The Shaft and Hub Are Single-Width Plate Welded Cy
The Shaft and Hub Are Expansion Sleeve Connection
Dynamic Balance and Static Balance
Tube/Shaft/Bearing/Bearing Block/Hub/Bushing
Self-Aligning Ball Bearings
Hrb/NSK
Submerged Arc Welding
45# Steel/40crmnmo/Stainless Steel
Q235/Q355/J355/Ss400/Stainless Steel
Cast Iron/Cast Steel/Zn35
60/65/70 Shore
KONWEYOUR
Wooden Box Packing and Pallet Packing
BW650, BW800, BW1000, BW1200, BW1400, BW1600,
Hengshui, China
8431390000
Product Description
A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.
Different kinds of conveyor pulleys
KONWEYOUR® sells conveyor pulleys in all the following sub-categories:
Head pulleys
The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).
Tail and wing pulleys
The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.
Snub pulleys
A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.
Drive pulleys
Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.
Bend pulleys
A bend pulley is used for changing the direction of the belt.
Take-up pulley
A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.
| Type | Belt width(mm) | Standard Diameter(mm) | Length(mm) |
| Drive Pulley | 500 | 500 | Length of the pulley depends on the belt width of the conveyor |
| 650 | 500~630 | ||
| 800 | 630~1000 | ||
| 1000 | 800~1150 | ||
| 1200 | 800~1150 | ||
| 1400 | 1000~1350 | ||
| 1600 | 1150~1600 | ||
| 1800 | 1150~1800 | ||
| 2000 | 1350~2000 | ||
| 2200 | 1600~2200 | ||
| 2400 | 1800~2400 | ||
| Bend Pully | 500 | 250~500 | |
| 650 | 250~630 | ||
| 800 | 250~1000 | ||
| 1000 | 250~1600 | ||
| 1200 | 250~1600 | ||
| 1400 | 315~1600 | ||
| 1600 | 400~1600 | ||
| 1800 | 400~1600 | ||
| 2000 | 500~1600 | ||
| 2200 | 630~1600 | ||
| 2400 | 800~1600 |
