Audited Supplier
Laser cleaning equipment is a new generation of surface treatment high-tech products, which are easy to install, operate and realize automation. The operation is simple, the power is turned on, and the equipment is turned on, you can clean without chemicals, media, and water. The focus can be manually adjusted, and the surface can be cleaned. The cleaning surface has high cleanliness and can remove resin, paint, and oil on the surface , Stains, dirt, rust, coating, plating and oxide layer, and the industry is widely used, covering ships, auto repair, rubber molds, high-end machine tools, rails, and environmental protection.
Laser cleaning technology refers to the use of high-energy laser beams to irradiate the surface of the workpiece to cause the dirt, rust or coating on the surface to evaporate or peel instantaneously, and effectively remove the adhesion or surface coating on the surface of the cleaning object at a high speed, so as to achieve a clean process. It is a new technology based on the interaction effect of laser and matter.
Technical characteristics
High cleanliness
Can be accurately positioned and cleaned
Non-contact cleaning to protect the surface of brittle materials
Effectively remove micron-level pollution particles
Environmental protection, no consumables required
Laser Cleaning Machine System
Lasers can provide high-speed cleaning and surface preparation in virtually all industries. The low-maintenance, easily automated process can be used to remove oil and grease, strip paint or coatings, or modify surface texture, for example adding roughness to increase adhesion.
No abrasive materials are used, with no problems of contaminant separation and disposal
No solvents are used - chemical-free and environmentally friendly process
Spatially selective - cleaning only the area required, saving time and costs by ignoring regions that don't matter
Non-contact process never degrades in quality
Easily automated process that can lower operating costs by eliminating labor while giving greater consistency in results.
| Pulse Laser Cleaning Machine Parameter | |
| Item | 500W |
| Cooling system | Water Cholling |
| Cooling system | Raycus |
| Laser type | Nanosecond pulse fiber |
| Scan laser head weight | 0.8kg |
| Multimodal scan | Line,Circular ,Spiral Rectangle, Line filled, Circular |
| Voltages | Single phase 220 volts ±10% 50/60HZ |
| Maximum output power | 500W |
| Wavelength | 1064±5 nm |
| Laser beam quality | ≤62.5 M² |
| Pulse adjust range | 130-160 ns |
| Laser pulse frequency | 20-50 kHz |
| Power adjust range % | 10-100 |
| Output power instability % | ≤5 % |
| Maximum single pulse energy | 25 mJ |
| Scan width mm*0.7 | 160,254,330 |
| Fiber length m | 10 |
| The machine dimension | 1080*710*1170 |
| The machine weight | 233 kg |
| Packaging dimension | 1220*810*140mm |
| Packaging weight | 274 kg |
