Audited Supplier
GT-NMM-630
Lifetime Maintenance
Lifetime Maintenance
700mm
<900kg
Material Testing Machine
<1000KN
1
Electronic Load
Dynamic Load
Digital
Computer Control
100-500Kg
AC220V
Under
GT-TEST
Wooden Package
400kg
Beijing
9024800000
Product Description
Pipe Notch Milling Machine
Standards
ISO 13479:1997 <<Polyolefin pipes for the conveyance of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test) >>
Application
It is mainly used for making notches in the plastic pipes for Slow Crack Growth Resistance test.
It is widely used in the research, production and testing of polyethylene (PE) gas pipe. It is an essential instrument for the environmental stress cracking test.
Features
Standards
ISO 13479:1997 <<Polyolefin pipes for the conveyance of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test) >>
Application
It is mainly used for making notches in the plastic pipes for Slow Crack Growth Resistance test.
It is widely used in the research, production and testing of polyethylene (PE) gas pipe. It is an essential instrument for the environmental stress cracking test.
Features
- The pipe and the notch milling machine should be fixed in the way of hoisting and clamping of the mandrel shaft, and the cutting tool should be parallel to the inner wall of the pipe. To ensure that the depth of the milling notch is not limited by the ellipse of the pipe and the difference in wall thickness, to ensure that the cutting depth is the same.
- High precision 60° V carbide machining tool ensures that the end of the pipe is smooth and clean after cutting.
- Module design for the whole system, and milling knife is over the test piece, it is easy to observe.
- Pipe diameter range : Ф63mm-Ф630mm
- Notch depth: 19% of pipe wall thickness
- Notch length: depending on the pipe diameter
- Feeding accuracy: ±0.1mm
- Rotation rate of cutting knife: 700r/min
- Power supply: 380V 50HZ 5A 180W
