Audited Supplier
poe65057
Oxidative Degradable
26221-73-8
H- (-O- CH2 -CH2-)N-Oh
Poe
General Plastics, Engineering Plastics, Specialty Plastics
Thermoplastic Plastics
Injection
Transparent Color
High Flow Injection Molding Parts
WANSUPER
25kg/Bag, 1000kg/Pallet
POE RESIN
Yantai
3904220000
Product Description
WANSUPER® 65057 POLYOLEFIN ELASTOMER (POE)DESCRIPTION
. WANSUPER® 65057 is an ethylene-butene copolymer produced bysolution
polymerization using metallocene catalyst.
. WANSUPER® 65057 is a low density and high performance copolymer
modifier to provide excellent flow characteristics andimpact properties.
. Typical applications include impact modifier in thermoplastic olefin
compounds, footwear midsoles and wire and cable extrusion.
| Test method | Unit | Typical values | ||
| Physical | ||||
| Melt index (2.16kg/190ºC) | ASTM D1238 | g/10min | 5.0 | |
| Density | ASTM D792 | g/cm³ | 0.875 | |
| Mechanical 1 | ||||
| Tensile modulus (100% secant, 500mm/min) | ASTM D638 | MPa | 2.0 | |
| Tensile strength at break(500mm/min) | ASTM D638 | MPa | 5 | |
| Elongation at break(500mm/min) | ASTM D638 | % | 800 | |
| Flexural modulus (1% secant) | ASTM D790 | MPa | 9.2 | |
| Tear strength (Type C) | ASTM D624 | KN/m | 35 | |
| Hardness (Shore A, 1 sec) | ASTM D2240 | - | 70 | |
| Hardness (ShoreD, 1 sec) | ASTM D2240 | - | 18 | |
| Thermal | ||||
| Melting temperature | Wanhua method | ºC | 59 | |
| DSC Glass transitiontemperature | Wanhua method | ºC | -49 | |
Hoskimi Technology (Shanghai) Co., Ltd. Was established in 2010 and is located in Shanghai Hongqiao West Business District. It provides customers with timely technical service support, diversified multi-brand material supply, and optimal material selection suggestions and combinations. It has modern warehousing services and is committed to providing customers with the best cost-effective solutions and stable & reliable supply resources.
Plowing in the automotive industry for 14 years, has a wealth of experience in the automotive industry development and after-sales service, with Mercedes-Benz, BMW, Tesla, SAIC and other major automotive OEMs and Tier 1 Glammer, Xinquan, Changzhou Interior and other close cooperation, in the project there are many successful cases, such as SAIC RX5, SAIC MG SUV, SAIC Audi A7, Lixiang L6, Mercedes-Benz C. Class, SAIC Motor General Motors and etc.
Q: Where is your company based?
A:Our company located in Room 501, 5/F, Xin'ao Business Building, No. 720 Huajiang Road, Jiading District, Shanghai, China.
Q:What can you buy from us?
A: PC, PC/ABS, Polymethyl methacrylate, ABS, PA, POM, TPE, TPV and Etc.
Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
Q:What are your terms of payment?
A:T/T, L/C,. Option A:30% pay in advance, 70% before shipping
Q: What is your packing?
A:Basically our packing is in 25/KG bags.
Q:Where is the loading port?
A:Usually Shanghai.
Q:What is the normal lead time?
A: We will send goods to departure port within 5-10 workdays after we receive your payment.
Q:If any quality problem, how can you settle it for us?
A: When discharging the container, you need to inspect all the goods. If any breakage or defect products were found, you MUST take the pictures from the original carton. All the claims must be presented within 7 working days after discharging the container. This date is subject the arrival time of container. We will advise you to certify the claim by third party, or we can accept the claim from the samples or pictures you present, discharging of the container is not included. Finally we will completely compensate all your loss.
