Audited Supplier
LDPE
Photodegradable
9002-88-4
[-CH2-CH2-]N-
618-339-3
Low Density Polyethylene/LDPE
Thermoplastic Plastics
Film Pressure
White
2 Years
3-7 Days
Granule, Resin, Pellets
Plastic Products
Carton
25Kgs/Bag
China
3901100090
Product Description
Product Description
product name:Plastic Granule HDPE/LDPE
Low density polyethylene is the lightest kind of polyethylene resin. It has good softness, extensibility, electrical
insulation, transparency, easy processing and certain air permeability. It has good chemical stability, alkali resistance and
general organic solvent resistance.
Density: 0.918~0.935g/cm3
Melting point: 110 ~ 125 ºC
Grade: Film Grade, Injection Molding Grade, Rotomolding Grade
Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its
LOW DENSITY and the softest material. It has a good set of physical properties and superior mechanical properties. The materials produced by this product exhibit high impact strength and high fluidity, combined with excellent modulus and tensile strength, resulting
in high productivity on the production machine. Its toughness can still be retained at low temperature.
Can pull the tube, do waterproof material. It has
good softness, elongation,electrical insulation, transparency, ease of processing, and a certain degree of breathability. It has good chemical stability,alkali resistance, and resistance to general organic solvents.
Product Parameters
LDPE Injection Grade
product name:Plastic Granule HDPE/LDPE
Low density polyethylene is the lightest kind of polyethylene resin. It has good softness, extensibility, electrical
insulation, transparency, easy processing and certain air permeability. It has good chemical stability, alkali resistance and
general organic solvent resistance.
Density: 0.918~0.935g/cm3
Melting point: 110 ~ 125 ºC
Grade: Film Grade, Injection Molding Grade, Rotomolding Grade
Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its
LOW DENSITY and the softest material. It has a good set of physical properties and superior mechanical properties. The materials produced by this product exhibit high impact strength and high fluidity, combined with excellent modulus and tensile strength, resulting
in high productivity on the production machine. Its toughness can still be retained at low temperature.
Can pull the tube, do waterproof material. It has
good softness, elongation,electrical insulation, transparency, ease of processing, and a certain degree of breathability. It has good chemical stability,alkali resistance, and resistance to general organic solvents.
Product Parameters
LDPE Injection Grade
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 15 | g/10min |
| Density | 0.922 | g/cm3 |
| Tensile Yield Strength | 7 | Mpa |
| Elongation at Break | 75 | % |
| Wien Softening Point | 85 | °C |
| Packing | In 25 kg PP woven bags,20MT/20'FCL | |
