Audited Supplier
MTW-1000 MTW-2000 MTW-3000
Over Sea and Domestic Engineer Service 24 Hours
Welded Wire Mesh Machine
380V
Horizontal
2 Years
Engineers
0.4-2mm
2600
80 Set/Sets Per Year
Provided
Construction Mesh
Easy to Operate
Control Cabinet
Engine,Gearbox,Motor
Wire Mesh Welding Machine
China
Provided
1/41/21234
Metal Mesh Welding
5.5
Metal Tech
Wooden Case or Nude
Mesh size 12.5x12.5-50x50
China
84633000
Product Description
Metal Tech Electric wire mesh welding machine is a specialized piece of equipment used for welding wire mesh. Below is a detailed introduction to this machine:
Overview
Electric wire mesh welding machines adopt electrical and electronic synchronous control techniques, with both separate-phase welding and welding time controlled by digital and integrated electric circuits. This ensures accurate and stable operation, with firm welded points and no welded tracks.
Working Principle
Cross Wire Feeding: Cross wires are pre-straightened and cut, then put into the cross wire hopper. A step motor in the hopper controls the fetching and feeding of the cross wires into the welding area automatically, ensuring accuracy.
Longitude Wire Feeding: Longitude wires are fed from coils.
Mesh Pulling System: The mesh pulling system adopts an elastic tension link and mesh opening size positioning system, making it easy to regulate the mesh hole size. The welding aperture can be adjusted randomly within a certain range.
Technical Parameters
The technical parameters of electric wire mesh welding machines can vary depending on the model and manufacturer
Rated Electrical Power: Usually in the range of several tens to hundreds of kilovolt-amperes (kVA).
Width of Mesh: Can be designed.
Rated Voltage: Often three-phase, with options such as 380V, 220V, 415V, or 440V, at either 50Hz or 60Hz.
Welding Speed: Typically fast, with some machines capable of welding up to several dozen times per minute.
Applications
Electric wire mesh welding machines are widely used in various industries, including:
Construction: For producing reinforced steel mesh used in concrete structures to improve stability and durability. Applications include beams, columns, floor slabs, roofs, walls, concrete pavements, bridge decks, airport runways, tunnel linings, box culverts, dock floors, and prefabricated components.
Transportation Facilities: For reinforcing the stability of roadbeds and bridge decks in highway bridges and tunnel excavations; for reinforcing and maintaining airport runways; and for reinforcing tunnels.
Fence Manufacturing: For manufacturing various fences, such as highway guardrails, bridge guardrails, railway barriers, industrial zone fences, and campus walls.
Agriculture and Horticulture: For constructing grain storage facilities to ensure the safe storage of grain; and for isolation and protection in aquaculture.
Slope Support and Highway Maintenance: For preventing soil erosion and maintaining road stability.
Overview
Electric wire mesh welding machines adopt electrical and electronic synchronous control techniques, with both separate-phase welding and welding time controlled by digital and integrated electric circuits. This ensures accurate and stable operation, with firm welded points and no welded tracks.
Working Principle
Cross Wire Feeding: Cross wires are pre-straightened and cut, then put into the cross wire hopper. A step motor in the hopper controls the fetching and feeding of the cross wires into the welding area automatically, ensuring accuracy.
Longitude Wire Feeding: Longitude wires are fed from coils.
Mesh Pulling System: The mesh pulling system adopts an elastic tension link and mesh opening size positioning system, making it easy to regulate the mesh hole size. The welding aperture can be adjusted randomly within a certain range.
Technical Parameters
The technical parameters of electric wire mesh welding machines can vary depending on the model and manufacturer
Rated Electrical Power: Usually in the range of several tens to hundreds of kilovolt-amperes (kVA).
Width of Mesh: Can be designed.
Rated Voltage: Often three-phase, with options such as 380V, 220V, 415V, or 440V, at either 50Hz or 60Hz.
Welding Speed: Typically fast, with some machines capable of welding up to several dozen times per minute.
Applications
Electric wire mesh welding machines are widely used in various industries, including:
Construction: For producing reinforced steel mesh used in concrete structures to improve stability and durability. Applications include beams, columns, floor slabs, roofs, walls, concrete pavements, bridge decks, airport runways, tunnel linings, box culverts, dock floors, and prefabricated components.
Transportation Facilities: For reinforcing the stability of roadbeds and bridge decks in highway bridges and tunnel excavations; for reinforcing and maintaining airport runways; and for reinforcing tunnels.
Fence Manufacturing: For manufacturing various fences, such as highway guardrails, bridge guardrails, railway barriers, industrial zone fences, and campus walls.
Agriculture and Horticulture: For constructing grain storage facilities to ensure the safe storage of grain; and for isolation and protection in aquaculture.
Slope Support and Highway Maintenance: For preventing soil erosion and maintaining road stability.
Model | MED-1000 | MED-2000 | MED-3000 |
Wire diameter | 0.4-0.65mm | 0.65-1.8/0.8-2/0.65-2mm | 1.0-2.2/1.2-2.5mm |
Aperture/pitch | 6.25,12.5mm | 12.5, 25, 50mm | 25, 50, 75, 100mm |
Mesh width | Max.1m or 1.2m | Max.1.2m, 1.5m, 2m | Max.1.2m, 1.5m, 2m, 2.5m |
Motor | 2.2kw | 2.2kw,4kw | 4kw,5kw,7.5kw |
Welding speed | Max.75 rows/min | Max.120-180 rows/min | Max.80-120 rows/min |
Transformer | 50kva*3 | 60kva*4/5/7 | 70kva/80kva*5/6/7/8 |
Weight | 1.5T | 2T, 2.5T | 2T, 2.5T, 3T, 3.5T |
1.What is your company main products: A: We are manufactuer of wire drawing machine ,gabion machine ,nail making machine, chain link fence making machine, barbed wire making machine etc. 2.what is your service: A:We supply 5 stars service system,pls contact us for the details. 3.Do your machines are standard or custom made: A: We can custom made for each client ,according to the final products' parameters , also we offer custom made for the power ,electric parts etc. 4.What is the delivery time? A. Usually 30- 60 days , it depends the machine and season. 5.What is your time of warranty: A:12 months after commissioning or 18months after shipment. Whichever first is in valid. (it is excluding wear parts. Shipping cost for parts to be replaced during warranty period has to be borne by the customer).And we will offer 1 time 1 year free maintenance for our VIP client.
