Audited Supplier
Professional fire extinguisher factory & supplier : ZheJiang Guan An Intelligrnt Fire Fighting co., Ltd ; JiangShan city, QuZhou, Zhejiang Province, China. All kinds Fire extinguisher OEM and ODM One-stop service Customized. Happy send sample to you confirm quality. 7x24 hours online service ; | |||
1. Dry Powder Chemical Fire Extinguisher | 2. CO2 Fire Extinguisher (CARBON STEEL) | ||
3. Foam & Water Fire Extinguisher | 4. Trolly Fire Extinguisher | ||
5. Dry Powder Automatic Fire Extinguisher | 6. Fire Extinguisher Empty Cylinder | ||
7. Stainless Steel Cylinder | 8. UL Standard Fire Extinguisher | ||
Valve material | brass |
Cylinder material | ST12 |
Pressure gauge | spring pressure gauge/imitation diaphragm pressure gauge/diaphragm pressure gauge |
Bracket | iron/plastic, colour:red/black |
Working pressure | 14bar, testing pressure:25bar |
Cylinder thickness | 1.4mm/1.5mm/1.8mm |
Cylinder diameter | 150mm,height:470mm |
Valve releasing device | with/without as customers'requirements |
Powder component | ABC/BC 10%,20%,30%,40%,50%,70%,75%,80%,90%,95% |
Carton size | 56*33*16mm /2PCS |
How to use the fire extinguisher | |||
1. Pull out the safety pin, hold it away from you and release the locking mechanism. | |||
2. Aim low and target the source of the flame rather then the flame itself. Ensure that you stand at least 1.8 meters away from the fire, make sure that you are not spraying against the wind direction. | |||
3. Squeeze lever evenly , and slowly with the extinguisher in an upright postion. | |||
4. Sweep the nozzle from side to sode, target the source of the flame till either the fire is out or the extinguisher runs dry. | |||
Usege Rang | |||
1. Fire from solid (Ordinary Combustion) | |||
2. Fire from liquid (Fiammable Liquid) | |||
3. Fire from gas (Fiammable Gas) | |||
Warnings | |||
1. Do not use if pressure indicator enters red section. | |||
2. Do not use outside specified temperature range. | |||
3. The extinguisher should be inspected every year, it should be recharged if the indicator of the pressure gauge is under the green sector. | |||
4. The extinguisher should be recharged once be used. It should be tested before recharging. | |||
5. The extinguisher should be put in the place where the air is dry and not corroding. And it mushn't be put on the fire, in the sun, in the rain and be rammed. | |||
6. Test pressure(pt): 28Bar | |||
7. Temperature range: -30 to + 60 |
Carbon Fire extinguisher Water-Based Fire Extinguisher Stainless Steel Cylinder Dry Powder Fire Extinguisher
Trolly Fire Extinguisher Automatic Fire Extinguisher UL Standard Fire Extinguisher Korea Fire Extinguisher
Fire Extinguisher Cylinder ABC dry Powder Fire Extinguisher Empty ABC Dry Powder chemical Cylinder
Zhejiang Ketai Safety Technology Co., Ltd. is a modern enterprise which is located in No.59-1, Hehuatang,Mache Village, Hushan Street,Jiangshan City,Zhejiang Province, only 3 kilometers away from the city, with superior geographical environment and convenient transportation. The company specializes in the production of fire extinguishers and fire extinguisher accessories, intelligent fire extinguishing equipment.The Main products include carbon dioxide fire extinguisher, Sevofluoropropane fire extinguisher, water-based fire extinguisher, dry powder fire extinguisher and flame sense, temperature sense, infrared detection and other intelligent fire extinguishing equipment. The company was established in December 2020.Since its establishment, through the introduction of talents, new equipment and new technology, it has continuously increased product development, technological transformation and independent innovation, and won more than 10 national patents; In August 2023,12 products of the company have passed the CE certification of TUV Company, and the products obtained the sales right of EU. The company has complete production equipment, advanced testing instruments, more than 100 registered employees, a factory area of more than 30,000 square meters, and an annual output value of more than 50 million yuan. The company works closely with domestic universities, Cooperate with the University of electronic science and Technology to establish an enterprise doctor station, and constantly develop new products adapted to the local market.The company's temperature and flame sense spherical fire extinguishing products are favored by the market because of their convenience to throw and launch, and suitable for long-distance fire extinguishing characteristics. In addition, the company also pays attention to the integrity of management, according to customer needs to launch personalized product customization, so as to maximize the interests of customers, focusing on the Middle East market, and successfully expanded the products to more than 50 countries in West Africa, Latin America, Eastern Europe and other countries and regions.
"Champion quality, safety guarantee" is the company's business purpose. We always take manufacturing high quality products as our own responsibility, to serve more customers. Through continuous technological innovation and market expansion, Zhejiang Ketai Safety Technology Co., Ltd. has made remarkable achievements in the domestic and foreign markets, showing its strength and potential as a modern enterprise.
Good and safe Package . we packing very careful protection your goods and samples . Accept custom packaging. | |||
1. HS code for you : | 8424100000 | ||
2. Genrenal packing : | we have genrenal packing it: each piece put in opp bag + carton box. if you need woven bag, we happy do it for you. | ||
3. Coustomed packing : | follow your request or packing details. save you cost and time, more profit for u . | ||
Q: What is your main product?
A: ABC dry powder chemical fire extinguisher, co2 fire extinguisher, water-based fire extinguisher.
Q: What is the MOQ?
A: The MOQ is 200 PCS, but we also can provide you samples for quality inspection.
Q: What is the delivery time?
A: Usually within 20 days, samples will be prepared within 5 days.
Q: Our company needs some samples. Can you provide them for free? Or do you need us to pay for them?
A:According to the products, it we charge the samples, freight will be return back when we confirmed the order.
Q: Where is your factory located? How can I visit there?
A: We are located in Quzhou City Zhejiang province China.
50 mints by High Speed Train from YIWU city.
80 mints by High Speed Train from Hangzhou city.
120 mints by High Speed Train from Shanghai city.
All our clients are warmly welcomed to visit us.
Q: What is your payment terms?
A: T/T, L/C ,Western Union,Cash are accepted.
