Audited Supplier
| Wheel Dia | 94mm(3.8''), 100mm(4''), 114mm(4.5''), 125mm(5''), 145mm(5.8''), 150mm(6''), 184mm(7.4''), 200mm(8'') |
| Wheel Material | PP, ER, PA,PU |
| Fork Assembly | Dark Green Painted, Zinc Plated, Chrome Plated,Color Galvanized, Dark green Plastic |
| Fitting | Swivel(top plate), Swivel(thread plate), Swivel(hollow rivet), Rigid, Swivel grip ring stem |
| Brake Assy | Total lock brake(metal), Tread lock brake(metal), Side lock brake(metal), Total lock brake(plastic), Tread lock brake(plastic), Total side lock brake(metal) |
| Bearing Model | Singel ball bearing, Double ball bearings, Derlin bearing, Plain bore(bushing bearing) |
| Application | Genreral industry, Trolley, Medical equipment, Electronic equipment and logistics handling, Scaffold, Material shelf |
Customized Service of SUPO
The approved loading weight in this industry's purchase guide means to satisfy several essential conditions: 1. The ground must be smooth. 2. The environmental temperature should remain between 20-30ºC (excluding high-temperature casters). 3. The moving speed must not exceed 4 km/h.1. If the single caster you choose supports over 200kg and is driven by traction, with a moving speed not exceeding 6 km/h and meeting the other two conditions, ensure the actual loading weight is no more than 80% of the approved weight to prolong the caster's life.
2. For a single caster chosen over 200kg, if operated by traction, with a moving speed between 6-8 km/h, and satisfying the other conditions, maintain the actual loading weight below 60% of the approved weight to extend the caster's lifespan.
Should your caster requirements exceed the conditions mentioned above, please reach out to us. Our expert engineering team will offer a bespoke caster tailored to your industry's specific environmental application and installation dimensions.
1. Are you trading company or manufacturer?
We are manufacturer since 2004. Previous it was plastics ejection company with over 20 years experience.
2. What is your warranty for your products?
18 months from the producing, the each item showed the producing date.
3. How can you control your quality?
First, we have raw material testing. A.Determing the melt mass flow rate of various thermoplastics. B. Test the mechanical properties of various materials such as tension, compression, bending, shearing, tearing and pelling. C. Making test samples. D. Fast and accurate moisture determination. E. Fast and accurate measurement of solid density. F. Determination of the impact strenght of plastics.
Then we have 1+11 testing standard: Weight carry running test
1.Initial wheel hub clearance test
2.Attrite wheel hub clearance test
3.Initial rotation clearance test
4.Attrite rotation clearance test
5.Braking test
6.Wheel brake effectiveness test
7.Rotation braking effectiveness test
8.Vertical static pressure test
9.Salt and acid test
10.High temperature test
11.Low temperature test
