Audited Supplier
Biodiesel machine
Biodiesel is used for chemical industry field, it makes bio-oil into biodiesel. Bio-oil can be plant oil, animal oil or high acid value waste oil.
The set of biodiesel equipment contains the international advanced pre-processing section, esterification process and distillation process, and it meets the European Union Standards. We have obtained patent, and patent No. Is ZL200920089138.8. The production stepsare as follows:
1. Preprocessing section of bio-oil: When heated to 65~70° C, bio-oil is leached to remove impurities.
2. Drying section: Bio-oil without impurities is dehydrated and dried
3. First esterification reaction: Adding bio-oil dehydrated to methanol including 3% sulfuric acid, first esterification reaction starts, and it will take 1.5~2.5 hours.
4. Second esterification reaction: This esterification reaction will take 9~12 hours.
5. Vacuum drying section: Second esterification reactants are dried with vacuum, removing moisture, reducing water content below 3%.
6. Distillation section: With vacuum state, section esterification reactants after vacuum drying section are heated to 220° C, biodiesel forms by steaming. Then cooling biodiesel to be liquid, the liquid biodiesel is just finished biodiesel.
7. Methanol fine-distillation: After biodiesel is isolated, the remaining methanol liquid is distilled to form methanol. Cooled methanol can be reused.
Equipment advantages:
1. Stable process performance
2. Simple operation
3. Small investment of equipment
4. High conversion rate(up to 85%)
Animal&vegetable oil and acid oil can be used to make biodiesel. Biodiesel is novel green fuel, there are following featurers:
1. Good driving performance for low-temperature motor, cooling point can reach -10° C without adding agent
2. Good lubrication performance ensures low wearing rate of oil spraying pump, engine tank and rods
3. As flash point of biodiesel is higher than mineral diesel, biodiesel does not belong to dangerous goods.
4. Sulfur content is low, small emission
5. Low residual combustion char(0.02%), i. e. Microparticles content of waste gags is low.
6. Damage of waste gas after combustion is lower than that of mineral diesel
7. High biodecomposition rate is favorable for environment protection.
Quality and Service Commitment | |
Our company always put the interests of customers and product quality to the first place,and always adhere to the"no best, only better" as our purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments are as follows: | |
1. | Ensure to timely provide complete sets of equipment and accessories. |
2. | Ensure that one-time installation debugging acceptance. |
3. | To provide high quality material with preferential price. |
4. | Priority to provide customer our new craftworks and products. |
5. | Free training technological operator to ensure the trained staff can operation independently. |
6. | In the installation process,we will appoint a installation supervision staff on the spot. |
7. | we will offer an experienced project manager, organize a good installation team for the work of field installation debugging. |
8. | After the equipment field assembly and installation, we will be also responsible for the single equipment debugging, online debugging and Feeding trial operation,to ensure that equipments can normal operate in full load conditions. We will provide all kinds of information and records according to the requirements of the bid. The qualified completion files will be provided to customers according to their requirements within one month after acceptance. |
9. | In the warranty period, all because of the quality of products has caused the damage or failure of equipment, suppliers will take the responsibility for the free repair and replacing spare part. Due to the damage caused by the customer,we only charge material costs for repair and replacement. After the receipt of customers notice,we will suggests the method to solve problem within six hours,or send specialist to the site to solve the problem within twenty four hours. |
