Product Description
Physical characteristics of volcanic rock filter material:
Performance indicators | Unit | Detection result | Performance indicators | Unit | Detection result |
Partical size | mm | 1-2/2-4/3-5 /4-6/6-8/8-12 | Void fraction | % | >50 |
Bulk density | g/cm3 | 0.9-1.0 | Attrition loss | % | <5 |
Apearance | g/cm3 | 1.7-2.5 | Sepecific surface area | cm2/g | >4x104 |
Mud content | % | <1 | Acid solubility | % | <5 |
Uniformity coefficientK60 | <1.7 | Extractables | Does not contain harmful ingredients (test report provided) |
3. Mechanical strength: 7.68Mpa by the national quality inspection department, which has been proved in practice to withstand the hydraulic shear action of different strengths, and the service life is as long as 10.
4. Specific gravity: the specific gravity is moderate, it is easy to suspend and do not run the material during backwashing, which can save energy and reduce consumption.
Chemical properties of volcanic rock filter media:
The main chemical components are as follows:
Chemical composition | SiO2 | CaO | MgO | Fe2O3 | FeO | Al2O3 | K2O | Na2O |
Content% | 53.63 | 8.36 | 2.46 | 9.08 | 1.12 | 16.89 | 2.30 | 2.55 |
2. The biological film hanging time is short, and the adsorption and film hanging are carried out simultaneously;
3. There is a lot of biomass, and it has a good treatment effect on ammonia nitrogen, COD, BOD, phosphorus, etc.;
4. Easy to backwash, not easy to compact.
Application scenarios of volcanic biological filter media
Serial number | Specification | Application scenarios |
1 | 1-2mm | Multi-media filtration equipment |
2 | 2-4mm | Deep-bed denitrification biological filters |
3 | 3-5mm | (BAF)Aeration biological filters |
4 | 5-8mm | Upflow denitrification biological filter |
5 | 8-12mm | Pretreatment offeedwater biofiltration |
6 | 10-30 mm | Gas biodeodorization |
7 | 30-50mm | Constructed wetlands |



