Audited Supplier
BQ NQ HQ PQ T2 T6 NQ3 PQ3 HQ3 GEOBOR-S NMLC
Core Drill
Geotechnical and Exploration Drilling
ISO, SGS
Diamond
ISO / Dcdma / Cdda
6mm-25mm
Soft to Ultra-Hard
High Performance High Abrasion
Optional
in Stock or 7 Days
by Express or by Sea
Hanlinsky
Cartons
BQ NQ HQ PQ T2 T6 NQ3 PQ3 HQ3 GEOBOR-S NMLC
Changsha, China
840719
Product Description
Our Company
Hunan Hanlinsky International Corporation is a leading chinese supplier and supporter of high quality mining machineries, crusher wear parts, Bi-metal & MMC new materials, rock drilling systems and relative services for mining & metallurgical industry. The corporation delivers the full, economical and sustainable solutions for global partners.
Description
Impregnated Diamond Core Bit
Impregnated Diamond Core Bit is made from high-quality synthetic diamond and metal powder which could be used in various types of strata. The best effect is achieved through the flexible design according to the different strata and parameters of drilling equipment.
Surface Set Diamond Core Bit
Surface Set Diamond Bit is produced from a single layer of natural diamond setting on the surface of bit crown with hard matrix, and primarily recommended for drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bit. It is also recommended for drilling harder formations, which the available rotary speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.
In most cases, Surface Set Diamond Bits will provide higher rates of penetration than in softer formations due to the greater degree of exposure of the individual diamond crystals.
Tungsten Carbide Core Bit
Tungsten Carbide Core Bits are designed especially for soil investigation and geotechnical drilling, but also suitable in some applications for mineral exploration. As the tungsten Carbide is softer than diamond stones, the formations are limited in the range of soft or some medium rocks, like the overburden drilling, cleaning of drill holes, e.g. for the removal of steel fragments in hole.
PDC Core Bit
PDC Core Bit has a long working Life, very fast penetration and high percentage core recovery in soft to hard rock formations. PDC bit mostly be used for drilling with air, mud or foam flushing.
Bit Availability
Note: for more details and other CDDA, DCAMA, Crealius, and ISO sizes, please make an inquiry to our engineers.
Hunan Hanlinsky International Corporation is a leading chinese supplier and supporter of high quality mining machineries, crusher wear parts, Bi-metal & MMC new materials, rock drilling systems and relative services for mining & metallurgical industry. The corporation delivers the full, economical and sustainable solutions for global partners.
Description
Impregnated Diamond Core Bit
Impregnated Diamond Core Bit is made from high-quality synthetic diamond and metal powder which could be used in various types of strata. The best effect is achieved through the flexible design according to the different strata and parameters of drilling equipment.
Surface Set Diamond Core Bit
Surface Set Diamond Bit is produced from a single layer of natural diamond setting on the surface of bit crown with hard matrix, and primarily recommended for drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bit. It is also recommended for drilling harder formations, which the available rotary speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.
In most cases, Surface Set Diamond Bits will provide higher rates of penetration than in softer formations due to the greater degree of exposure of the individual diamond crystals.
Tungsten Carbide Core Bit
Tungsten Carbide Core Bits are designed especially for soil investigation and geotechnical drilling, but also suitable in some applications for mineral exploration. As the tungsten Carbide is softer than diamond stones, the formations are limited in the range of soft or some medium rocks, like the overburden drilling, cleaning of drill holes, e.g. for the removal of steel fragments in hole.
PDC Core Bit
PDC Core Bit has a long working Life, very fast penetration and high percentage core recovery in soft to hard rock formations. PDC bit mostly be used for drilling with air, mud or foam flushing.
Bit Availability
| 1 | A-Gauge Core Bits | AQ, AQ-RSG, AWG(AX), AWM, AWT, LTK48 |
| 2 | B-Gauge Core Bits | BQ, BQ-RSG, BQ-2.400, BQ3, BWG(BX), BWM, BWT, LTK60, TBW |
| 3 | N-Gauge Core Bits | NQ, NQ-3.032, NQ2, NQ2-RSG, NQ3/NQTT, NQ3-RSG, NQ3-3.032, NMLC, NWG(NX), NWM, NWT, TNW |
| 4 | H-Gauge Core Bits | HQ, HQ-RSG, HQ-3.830, HQ-3.895, HQ3/HQTT, HQ3-RSG, HQ3-3.380, HQ3-3.895, HMLC, HWF-Long, HWF-Short, HWG(HX), HWT |
| 5 | P- Gauge Core Bits | PQ, PQ3, PWF-Long, PWF-Short |
| 6 | S- Gauge Core Bits | SWF-Long, SWF-Short |
| 7 | U- Gauge Core Bits | UWF-Long, UWF-Short |
| 8 | Z- Gauge Core Bits | Z- Gauge Core Bits: ZWF-Long, ZWF-Short |
| 9 | T, TT, T2 &TB Series Metric Core Bits | T36, TT46, T2-46, TB56, TT56, T2-56, T2-66, T2-76, T2-76 coreline, T2-86, T2-86 coreline, T2-101, T2-101 coreline |
| 10 | T6 Series Metric Core Bits | T6-76, T6-86, T6-101, T6-116, T6-131, T6-146 |
| 11 | T6S Series Metric Core Bits | T6S-76, T6S-86, T6S-101, T6S-116, T6S-131, T6S-146 |
| 12 | B Series(ISO3552-1) Metric Core Bits | B36, B46, B56, B65, B76, B86, B101, B116, B131, B146 |
| 13 | Chinese Standard Metric Core Bits for Double Tube | φ 56, φ 59, φ 75, φ 91 |
| 14 | Chinese Standard Metric Core Bits for Wireline | φ 59, φ 75, φ 91 |
| 15 | Chinese Standard Metric Core Bits for Single Tube | φ 36, φ 46, φ 56, φ 59, φ 75, φ 91, φ 110, φ 130, φ 160, φ 170, φ 219, φ 275 |
Note: for more details and other CDDA, DCAMA, Crealius, and ISO sizes, please make an inquiry to our engineers.
