Audited Supplier
PE400x600
1 Year
1 Year
CE, ISO 9001:2008
GB
Polishing
Casting
Cast Steel
Sand Casting
Sand
Permanent
Spray-Paint
Ra12.5
CE, ISO 9001:2008
High Manganese Steel
Red, Blue, Black, etc.
High Wear Resistance
Fixed or Swing Plate
Brand New
DENP
Wooden Case or Fixed on Rack
As the crusher brand and part no
Shanghai
8474900000
Product Description
Brand New Mn13 Mn18 Mn22 Jaw Plate For Replacement
Jaw die is the main wear part of jaw crusher, it has swing jaw die and fixed jaw die two types. The material can be Mn13, Mn18, Mn13Cr2, Mn18Cr2, etc. Denp adopts good materials and unique heat treatment method, so that ensures each piece of product with high wear resistance and long use life in different working condition.
Jaw dies from DENP are widely utilized around the world for its high quality, the long use life significantly decreases the maintain downtime and parts replacing time, also decreases customers' manufacture cost, improves customers' econamic benefit.
Jaw crusher is widely used in mining, metallurgy, construction meterial, highway, railway, water conservancy and chemical industries for crushing various materials with compression strength less than 350MPa. Jaw crusher is the preferred equipment for primary crushing in the complete production line.
Material ingredient table:
Jaw Crusher Parameters:
Product Images:
Workshop:
Jaw die is the main wear part of jaw crusher, it has swing jaw die and fixed jaw die two types. The material can be Mn13, Mn18, Mn13Cr2, Mn18Cr2, etc. Denp adopts good materials and unique heat treatment method, so that ensures each piece of product with high wear resistance and long use life in different working condition.
Jaw dies from DENP are widely utilized around the world for its high quality, the long use life significantly decreases the maintain downtime and parts replacing time, also decreases customers' manufacture cost, improves customers' econamic benefit.
Jaw crusher is widely used in mining, metallurgy, construction meterial, highway, railway, water conservancy and chemical industries for crushing various materials with compression strength less than 350MPa. Jaw crusher is the preferred equipment for primary crushing in the complete production line.
Material ingredient table:
| Material | C | Mn | Si | Cr | Mo | Ni | P | S |
| Mn13Cr2 | 1.0~1.3 | 11~14 | 0.3~0.6 | 1.7~2.4 | 0.1~1.0 | ≤0.03 | ≤0.05 | ≤0.03 |
| Mn18Cr2 | 1.1~1.4 | 17~20 | 0.3~0.6 | 1.7~2.4 | 0.1~1.0 | ≤0.03 | ≤0.05 | ≤0.03 |
| Mn22Cr2 | 1.1~1.4 | 20~24 | 0.3~0.6 | 1.7~2.4 | 0.1~1.0 | ≤0.03 | ≤0.05 | ≤0.03 |
| Cr26 | 2.3~3.3 | ≤1.0 | ≤1.2 | 23~30 | 0.1~3.0 | 0.1~1.0 | ≤0.06 | ≤0.04 |
Jaw Crusher Parameters:
| Model | Feed Opening Size | Max Feed Size | Capacity | Motor Power | Adjustment range of discharge opening | Eccentric shaft speed | Weight (t) |
| (mm) | (mm) | (m³/h) | (kw) | (mm) | (r/min) | ||
| PE250× 400 | 250× 400 | 210 | 3-13 | 15 | 20-60 | 300 | 2.8 |
| PE400× 600 | 400× 600 | 340 | 10-34 | 30 | 40-100 | 275 | 6.5 |
| PE500× 750 | 500× 750 | 425 | 20-52 | 55 | 50-100 | 275 | 10.5 |
| PE600× 900 | 600× 900 | 500 | 30-75 | 55 | 65-160 | 250 | 15.5 |
| PE750× 1060 | 750× 1060 | 630 | 72-130 | 110 | 80-160 | 250 | 28 |
| PE870× 1060 | 870× 1060 | 670 | 160-210 | 110 | 200-260 | 250 | 30.5 |
| PE900× 1200 | 900× 1200 | 750 | 90-190 | 132-160 | 95-180 | 200 | 50 |
| PE1000× 1200 | 1000× 1200 | 850 | 197-214 | 132-160 | 230-265 | 200 | 51 |
| PE1200× 1500 | 1200× 1500 | 950 | 188-500 | 160-250 | 150-350 | 180 | 100.9 |
| PE1400×1800 | 1400×1800 | 1100 | 288-480 | 250-315 | 500-1100 | 180 | 120 |
| PEX250× 750 | 250× 750 | 210 | 8-22 | 22 | 25-60 | 330 | 4.9 |
| PEX250× 1000 | 250× 1000 | 210 | 10-32 | 30 | 25-60 | 330 | 6.5 |
| PEX250× 1200 | 250× 1200 | 210 | 13-42 | 37 | 25-60 | 330 | 7.7 |
| PEX350× 700 | 350× 700 | 300 | 16-35 | 30 | 30-80 | 300 | 6.5 |
| PEX300× 1300 | 300× 1300 | 250 | 15-55 | 75 | 30-80 | 300 | 11 |
Product Images:
Workshop:
