Audited Supplier
656F payload is increased by 10%, from 5 tons to 5.5 tons. The machine design is new F series styling, and the stability is
improved through an extended wheelbase of 3,350 mm. An operator can work with less stress because 656F cab space increased by 20%.
Moreover, there is a 15% increase in fuel tank capacity which enable for longer work hours on a single filling. The new generation 656F provides superior performance and advanced features.
10% Productivity Boost
* Increased payload by 10%, from 5 tons to 5.5 tons.
* Improved stability through an extended wheelbase of 3,350 mm.
* Joystick/levers pilot control.
* High-performance bucket with a 10% larger fill factor.
* Various work tools available, including a rock bucket, side dump bucket and more.
F Series Cab: 20% Additional Space
* The F series cab now offers 20% more space, providing useful features like 24V power, fuel gauge, visor and much more.
* Improved lighting with LED beams and work lamps for nighttime operations.
* Protective bucket leveler design safeguards tilt cylinder and its rod from damage;
* 15% increase in fuel tank capacity for extended operational hours.
* Articulated frame center design reduces workspace demand and rear tire track, decreasing fuel consumption and tire wear. Double tape bearings withstand radius and axis loads, while a longer wheelbase enhances reliability.
* Lube cap prevents dust ingress, improving reliability.
* Double-sealed pins connecting the bucket and lift arm prevent dust and water entry.
* Lubricated passage for increased pin reliability, especially in heavy-duty applications.
* New dust prevention pilot valve ensures enhanced reliability.
* End face tooth design for more reliable connections and improved torque transfer capacity.
* World class hydraulic components ensure reliability and higher efficiency.
* Optimized driveshaft layout to double the durability of the main drive shaft.
* Cooling package frame damping design for enhanced reliability on rough roads.
* Metal hose capable of withstanding high temperatures for reduced failure rates and improved reliability.
* 6-ton heavy duty axle delivers superior reliability and durability.
Excellent Performance
* Increased ground-level bucket rack angle for larger material loads.
* Linkage offering the same dump clearance, enabling one-side truck loading with longer dump reach.
* Auto-to-Ready function for linkage after dumped material at maximum height.
* Low-speed engine delivers better noise control, improved fuel economy and high torque.
* 5% fuel efficiency improvement with E-fan.
* Shunt tank extends the durability of equipment seals and prevents the water pump from running dry.
* Countershaft transmission for enhanced reliability, higher efficiency and easy maintenance.
* The first gear with high draw bar and second gears with high speed. These two work together for more productivity and fuel efficiency.
* Larger circulation diameter torque convertor for an improved transfer ratio and higher efficiency.
* shift cushion for smoother gear shifts.
* Hydraulic cycle time achieved to 9.3s for handling more material within same timeframe.
* Finger control pilot system make operation easier and precision.
First-Class Safety
* Internal expanding drum parking brake automatically engages when air pressure falls below a set level.
* Slope switch ensures safe operation on slopes while maintaining power output.
* Certified backup alarm and frame lock bar for safety.
* Air tank with adaptor for tire charging and interior cab cleanliness.
* Soft first-step ladder to prevent damage.
Model | |
Model | 656F |
Main Specifications | |
Rated Load | 5,500kg |
Operating Weight with Standard Bucket | 17,678kg |
Bucket Capacity | 2.6-5m³ |
Wheel Base | 3,350mm |
Overall Dimension | 8,472*3,117*3,465mm |
Max. Drawbar Force | 170kN |
Breakout Force | 161kN |
Dump Clearance | 2,991mm |
B-Pin Height | 4,162mm |
Transmission | |
Transmission Type | Countershaft, power shift |
Transmission Gears | F4/R4 |
Torque Converter Type | Single stage, 3 elements |
Forward I/Reverse I | 7.6/7.6 |
Forward II/Reverse II | 14/14 |
Forward III/Reverse III | 22/22 |
Forward IV/Reverse IV | 39/39 |
Maker & Type | TR200 |
Axle (Axle, Tire & Brakes) | |
Main Drive Type | Spiral bevel gear, single stage |
Final Drive Reduction Type | Planetary type, single stage |
Rear- oscillation +/- | ±11 |
Engine | |
Engine Model | WD10G220E23 |
Rated Power | 162kW |
Rated Speed | 2,000r/min |
Displacement | 9.7L |
Implement Hydraulic System | |
Implement System Type | Open center flow sharing |
Boom Raise Time | 5.13s |
Hydraulic Cycle Time | 9.3s |
System Pressure Setting | 17MPa |
Brake System | |
Service Brake | Dry&caliper, air to oil control |
Parking Brake | Drum/Shoe |
Steering System | |
System Type | Load sensing |
Steering Pump Type | Gear pump |
System Pressure Setting | 16MPa |
Steering Angle (L/R) | 38±1 |
Tires | |
Size | 23.5-25 |
Type | Bias |
Layer | 16 |
Textured Type | L-3 |
