Audited Supplier
Overview
Automatic bus bar terminal block machine - this machine can realize multiple customization, one machine can simultaneously cut, chamfer, punch, tap, dot and print. A rate of 8000-10000 pieces / 8 hours is the processing speed.
- The machine is equipped with multi-function station, which can realize cutting, chamfering, drilling, tapping and printing.
- Friendly operation instructions, one operator can run multiple manufacturer machine.
- When running out of terminal block, terminal bar, machine manufacturer automatically stop.
Technical Parameters
| 1,Sidetracking large hole mechanism | 2 SETS |
| Maximum borehole diameter of side hole(mm) | 10 |
| Push stroke of side hole cylinder(mm) | 20 |
| Spindle speed of side hole | 8160,4800,2800,1640 (r/min) |
| Taper of the main shaft of side hole | B16 |
| Side hole motor power(three phase) | 750W, 440V, 50Hz,2800r/min |
| 2,Non shift vertical drilling mechanism | 2 sets |
| Maximum hole diameter of vertical hole(mm) | 5.5 |
| The longest stroke of the vertical hole position cylinder(mm) | 20 |
| Spindle speed of vertical hole(r/min) | 5600 |
| Vertical hole spindle collet | ER16 |
| Motor power of vertical hole(three phase) | 370W, 440V, 50Hz, 2800r/min |
| 3,Non shift tapping mechanism | 2 sets |
| Maximum wire attack diameter of wire tapping machine | M6 |
| Motor power of wire tapping machine(three phase) | 250W, 440V, 50Hz, 1400r/min |
| Spindle speed of wire tapping machine(r/min) | 1400 |
| Tapping machine spindle collet station | ER16 |
| 4,Chamfering mechanism | 2 sets |
| Maximum stroke of chamfering cylinder(mm) | 20 |
| Maximum cutter diameter of chamfering position(mm) | 6 |
| Rotating speed of chamfered main shaft(r/min) | 1400 |
| Chamfering motor power(three phase)×2 | 250W, 440V, 50Hz, 1400r/min |
| 5,Cutting mechanism | 1 set |
| Spindle speed of cutting machine(r/min) | 3800 |
| Maximum stroke of cutting position cylinder(mm) | 50 |
| Cutting motor power(three phase) | 0.75kw, 440V, 50Hz, 2800r/min |
| 6,Distribution control box | 1SET |
| Programmable controller(PLC) | 1SET JANPAN KEYENCE |
| Touch screen | 1SET TAIWAN WEINVIEW |
| Servo drive and motor | 1SET 400W Chinese xinje |
| Switching Mode Power Supply | 1SET 150W, TAIWAN MW |
| Relay | 7SETS JANPAN OMRON |
| AC contactor | 6SETS JANPAN FUJI |
| 7,The size and weight of the equipment | 1SET |
| Length * width * height(mm) | 3100*1150*1800 |
| WEIGHT(kg) | 650 |
The device is mainly composed of the following components:
Servo motor, work table, distribution box, ball screw and slideway, side hole work station, vertical drilling station, thread attack screw position, chamfering station, cutting station. Stepped back to the origin of the cylinder, feeding into the cylinder, feeding auxiliary clamping cylinder, lateral drilling auxiliary pressing cylinder, vertical drilling thrust cylinder, chamfer cutting machine, cylinder propulsion,propulsion cylinder, side drilled holes into the cylinder, point positioning cylinder.
Automatic bus bar terminal block machine - this machine can be customized terminal block and neutral link.
This machine can also be customized 4-way, 8-way and 12-way brass/copper neutral joints with tin-plated and nickel-plated.
We can also manufacture machines as per customer's requirements and specifications.
We provide machine customization, making for terminal block and neutral bar for all kinds of panel boards, switch gears and electrical switch boards.
