MadeInChina.com > Electrical & Electronics > Passive Components > Capacitor

Bsmj Sereis Box Type Power Factor Capacitor Improve Power Factor for Power Quality Solution

Price	$50.00 Compare
Min Order	1 Piece
Availability	In Stock
Shipping From	Shanghai, China
Popularity	238 people viewed
Quantity	+-

Shanghai Huakun Electrical Company Ltd.

Audited Supplier 4 years

Profile Certified by SGS/BV

Shanghai, China
Ella (Ms.)

Visit Homepage Product Catalog

Product Detail
Contact Supplier

Model NO.:

HKKBSMJL0.4-15-3

Type:

Polypropylene Capacitor

Application:

Power System Improve Power Factor

Packaging Type:

Wooden Box

Capacitance:

1-100kvar

Structure:

Fixed Capacitor

Manufacturing Material:

Polypropylene

Usage:

Power Factor Correction

Tuning:

Polystyrene Capacitor

Rated Voltage:

250VAC/400VAC/525VAC/690VAC

Rated Capacity:

1-100kvar

Tolerance:

-5+- 10%

Dissipation Factor:

Tg<=0.1%

Maximum Allowable Overvoltage:

1.1 Times Rated Voltage

Maximum Allowable Overcurrent:

1.30times Rated Current

Standard:

Gno2747-2004,IEC60831-1996

Material:

Metallized Polypropylene Film

Color:

Grey

Description:

Shelf-Heating Low Voltage Shunt Capacitors

Trademark:

Huakun

Transport Package:

Wooden Box

Specification:

187*40*235mm

Origin:

Shanghai, China

HS Code:

85321000

Product Description

The self-healing low-voltage shunt capacitor is suitable for power system frequency of 50Hz or 60Hz.It is mainly used to improve power factor ,reduce reactive power loss,improve voltage quality,excavate transformer capacity,etc.It is the best power-saving product recommended by the state.
After the capacitor is cut off from the power supply, it must be ensured that the residual voltage of the capacitor is reducedto 10% of the rated voltage before it can be put into operation again.Normally, this time will take about 200s, so the controllerwith the function of re putting locking time after the capacitor is cut off shall be selected.If a general controller is used,a separate quick discharge facility shall be installed.This limit is not applicable to the equipotential switch.The altitude shall not exceed 2000m.The ambient temperature category is - 25 / ºCC , the minimum temperature is - 25 ºC , the maximum temperature is class C,(the maximum temperature is not more than 50 ºC , the average temperature within 24 hours is not more than 40 ºC , andthe average temperature within one year is not more than 30 ºCC ).The capacitor shall be guaranteed to work under goodventilation conditions, and it is not allowed to work under airtight and airtight environment.