Audited Supplier
Germany Silver
Sheet
Cunizn
Low Carbon
0
0
0
0.005mm~3.0mm
5mm~300mm
TANKII
Wooden Cases
ROHS
Shanghai
7409400000
Product Description
C7701 Germany Silver Strip/Sheet C77000
Nickel Silver Sheet/strip/wireThe following grades of Nickel Silver are manufactured:
1. 25% Ni 20%Zn
2. 15% Ni 20%Zn
3. 18% Ni 18%Zn
4. 18% Ni 26%Zn
It is an alloy of Copper, Nickel and Zinc various types manufactured contain copper between 58% to 62%, Nickel between 8 to 16% and balance Zinc. Nickel Silver is used mainly in wire and strip form for manufacture of frame and Zip manufacturing industry.
Parameter for Nickel Silver Sheet/Copper Nickel Zinc Sheet:
Applications for Nickel Silver Strips/Copper Nickel Zinc Strips:
1) Shielding material for communication electronics
2) Antenna material
3) EMI-shielding material
4) Spring contact
5) Flexible terminal
6) Environmentally-friendly plating-free electronic parts and components
7) Quartz oscillator
8) High-level material
9) Electric material
Forms
Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square
rod, bar, forgings, plate, sheet
Features
Feature: Elasticity modulus: 115GPa
Good fatigue resistance.
Good electroplate performance
Welding performance is good
Fastness in high temperature
Good cold working, deep drawing, curve performance.
Nickel Silver Sheet/strip/wireThe following grades of Nickel Silver are manufactured:
1. 25% Ni 20%Zn
2. 15% Ni 20%Zn
3. 18% Ni 18%Zn
4. 18% Ni 26%Zn
It is an alloy of Copper, Nickel and Zinc various types manufactured contain copper between 58% to 62%, Nickel between 8 to 16% and balance Zinc. Nickel Silver is used mainly in wire and strip form for manufacture of frame and Zip manufacturing industry.
Parameter for Nickel Silver Sheet/Copper Nickel Zinc Sheet:
Alloy No. | Chemical Composition | |||
| Cu | Mn | Ni | Zn | |
| C75200 | 63.0-66.5 | 0-0.5 | 16.5-19.5 | Remainder |
| C7541 | 60.0-64 | 0-0.5 | 12.5-15.5 | Remainder |
| C77000 | 53.5-56.5 | 0-0.5 | 16.5-19.5 | Remainder |
Alloy No. | Quality Grade | Shanghai Properties | |||
| Tensile | Elongation | Hardness Test | |||
| Strength | |||||
| (Kgf/mm 2 ) | JIS | ShanghaiMetal | |||
| Standards | |||||
| C75200 | O | ≥ 38 | ≥ 20 | - | ≥ 110 |
| 1/4H | 38~46 | ≥ 10 | - | 110~140 | |
| 1/2H | 44~52 | ≥ 5 | 120~180 | 130~160 | |
| 3/4H | - | - | - | - | |
| H | 52~60 | ≥ 3 | > 150 | 150~180 | |
| EH | ≥ 58 | - | - | ≥ 180 | |
| SH | - | - | - | - | |
| C7541 | O | ≥ 36 | ≥ 20 | - | ≥ 110 |
| 1/4H | - | - | - | - | |
| 1/2H | 42~55 | ≥ 5 | 110~170 | 110~150 | |
| 3/4H | - | - | - | - | |
| H | ≥ 50 | ≥ 3 | > 135 | ≥135 | |
| EH | - | - | - | - | |
| SH | - | - | - | - | |
| C7700 | O | - | - | - | - |
| 1/4H | - | - | - | - | |
| 1/2H | 55~67 | ≥ 8 | 150~210 | 140~200 | |
| 3/4H | - | - | - | - | |
| H | 64~75 | ≥ 4 | 180~240 | 175~220 | |
| EH | 72~82 | - | 210~260 | 195~240 | |
| SH | 78~88 | - | 230~270 | 210~250 | |
Name | state | tensile strength | elongation | Stantard |
| C75400 | Soft Hard | ≥340Mpa ≥640Mpa | ≥35% ≥1% | GB/T2059-2000 |
| C75200 | Soft Hard | ≥375Mpa ≥540Mpa | ≥20% ≥3% | Q/HUAJ 26-2003 |
| C77000 | Soft Hard | ≥400Mpa ≥705-805Mpa | ≥40% ≥4% | Q/HUAJ 10-97 |
Applications for Nickel Silver Strips/Copper Nickel Zinc Strips:
1) Shielding material for communication electronics
2) Antenna material
3) EMI-shielding material
4) Spring contact
5) Flexible terminal
6) Environmentally-friendly plating-free electronic parts and components
7) Quartz oscillator
8) High-level material
9) Electric material
Forms
Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square
rod, bar, forgings, plate, sheet
Features
Feature: Elasticity modulus: 115GPa
Good fatigue resistance.
Good electroplate performance
Welding performance is good
Fastness in high temperature
Good cold working, deep drawing, curve performance.
