CATV Optical Line Amplifier 1550nm EDFA (Low Input Type) (HA5200)

AITC HA5200
CATV Line-Amplifier 1550nm EDFA

Product dessctiption

AITC CATV Optical Line Amplifier 1550nm EDFA (Low Input Type) (HA5200) series C-Band line-amplifier 1550nm EDFA (also knows as relay EDFA), is designed for the application of single channel or 1~8 continuous ribbon channels (ITU wavelength). Fiber CATV system operates generally in single wavelength that has no strict requirement on gain flatness. In order to reduce the effect of CNR deterioration caused by EDFA, input power should be as high as possible to make EDFA operate in saturated output power. The typical value of input power is >+3dBm.

Product feature

1.1540~1563nm operating bandwidth
2. High output, high reliability
3. APC, ACC, ATC controlled selection (HA5200/P)
4. Three exterior option: 1U (19" stander), 3D (12.4", 3U, Desk-type) and modulator
5.1U and 3D exterior, offering status appearance and diagnosing fault with LCD, standard RS232 6. Communication interface, SNMP network management function
7. Application of 3D models to adapt to laboratory

Main application

1. In the original 1550nm optical system, all 1310nm optical transmitters can be cancelled in the second grade service area with 0dBm receiving power. Instead, HA5200 can be adopted to carry out full optic relay and then achieve large acreage cover of all the service area.
2. Over-long trunk with low-input
3. AM CATV
4. Digital CATV
5. DBS & MMDS
6. FTTX PON
7. Laboratory application