Powered by I suzu 4JB1 engine, fuel source can be Biogas, natural gas, LPG.
-Biogas CHP 16kw/20kva
-Natural gas CHP 20kw/25kva
-LPG CHP 20kw/25kva
60Hz is also available on request.
Our CHP is with integrated control cabinet,easy for installation, on the top safe gas train is installed. Advanced gas engine control system,Auto Lambda control,easy start.
Main Characters Of SevenPower Micro CHPs
-Ability to switch between any 2 fuels from natural gas/biogas/LPG
-Powered by I suzu engine/Made In China
-Engine water cooled type,suitable for 24hours continuous running,longer service life
-Integrated control cabinet,easy for installations
-Safe gas train
-Advanced gas engine control system, ignition system, speed control system, air/fuel ratio control system
-3 steps heat recovery, high overall efficiency
-Soundproof canopy fully open design, easy for maintenance work
-Dual shock absorbers,less vibration
-Super silent design, lower noise level suitable for residential area
-Low exhaust emissions
-Auto Lambda control, easy start


Model Name | SP20N |
Frequency (Hz) | 50 |
Voltage | 400/230 |
Fuel Type | Natural gas |
Continuous Power(KWe) | 20 |
Thermal Output(KWt) | 42.5 |
Electrical Efficiency | 28.4% |
Thermal Efficiency | 60.4% |
Overall Efficiency | 88.8% |
Engine | I suzu |
Alternator | Kwise, other brands is available on request |
Controller | ComAp |
Canopy | With |
Noise level@100% load | ≤62dB(A)@1meter |
Genset Gas Inlet Pressure | 2-5kpa |
Gas consumption@100% load | 0.357/kwh |
For more information about the CHP, please consult with your sales representative.Thanks.
More Information About Our Factory


Our Customers' Visiting
