CE Approved Handheld Vital Sign Patient Monitor Portable Multiparameter Pulse Oximeter

The pulse oximeter is a non-invasive, handheld patient pulse oximeter. It operates only on Common 1.5V AA alkaline or rechargeable battery power. It is compact, small, light, and easy for learning and handling. It is suitable for pulse oximetering adult, pediatric, infant and neonate patients. It is widely used in the hospital's operation room, ICU, clinic section office, out-patient department, sickroom, emergency treatment, and the recovery and health care organizations, or in the family nursing and in the process of transporting patients. It can also apply to animals selectively.
Parameters measured by the pulse oximeter include: arterial oxygen saturation (SpO2), pulse rate (PR), pulse strength. The pulse oximeter measures these parameters through a SpO2 sensor and displays them on the LED screen after certain further processing.
The pulse oximeter is operated and controlled by the buttons on the front panel. It adopts LED in displaying measurements and in supplementary status indication.
 

Audio and visual alarm:The speaker sounds the alarm and the parameter's measurement flashes on the screen.
Prompting: Indicator of battery capacity.
Power saving: The pulse oximeter will automatic shut down when no pulse oximetering for 3 minutes.
Electrical specifications
Working Voltage:D.C. 2.8V~D.C. 5.4V.
Battery 
Type:Three common 1.5V AA alkaline or rechargeable batteries
Run Time:7-hour continuous operation with a new battery (environment temperature is 25ºC)

SpO2
Patient:Adult, pediatric, infant, neonate, animal
Range:35~99%
Resolution:1%
Accuracy:2%(70%~99%),unspecified(0%~69%)
PR
Range:30~250bpm
Resolution:1bpm
Accuracy:2bpm
 

Standard Packing List:
Pulse Oximeter main unit 1pc
Adult finger SpO2 sensor 1pc
The operator's manual 1pc
Selectable Accessory:
pediatric soft tip SpO2 sensor
Neonate/infant wrap SpO2 sensor
Ear clip SpO2 sensor