Audited Supplier
CMV-1100
Metal
Metal-Cutting CNC Machine Tools
Linear Control
Closed-Loop Control
CNC/MNC
0.001mm
High-End CNC Machine Tools
CE, ISO 9001
New
1000
560
560
150-710
1200*650
LEAD
Wooden Case
CE and SGS
China
Product Description
CE/ISO9001/SGS CNC Machine Center (CMV-1100)
Unit Features of Box way series:
1. Increase width on the column bottom, combined with box type structure, greatly upgrades rigidity and stability during machining.
2. Box slide ways on the 3 axes are high frequency hardened. Way surfaces are coated with Turcite-B and precision scraped.
3. Extra wide slide ways and distance between slide ways eliminate sticking problems at low speed travel while ensuring high stability.
4. The major structures are manufactured from Meehanite cast iron with scientific rib reinforcement. This reduces structural deformation to a minimum.
The structural parts are analyzed and designed by the advanced Finite Element Analysis.
Standard Accessories:
Spindle oil cooler unit
Full splash guard
Cutting coolant unit
Heat exchanger in control box
Auto power off
Auto lubrication system
Air blast through spindle
Work lamp
Tool box and tools
Rigid tapping
Mechanical, electrical operating manuals
RS-232 Interface
Transformer
Optional Accessories:
Spindle 10, 000/12, 000 RPM
Index table(320, 250)
(The fourth axis: Including manual type tailstock, oil tank, motor, driver )
Carousel type ATC(16, 20tools)
Arm type ATC(24 tools)
Screw type chip conveyor
Link chain type conveyor
AVR voltage regulator
Rear coolant flushing device
Coolant throught tool holder
Spindle oil cooling device
CE certificate.
Parameter:
Unit Features of Box way series:
1. Increase width on the column bottom, combined with box type structure, greatly upgrades rigidity and stability during machining.
2. Box slide ways on the 3 axes are high frequency hardened. Way surfaces are coated with Turcite-B and precision scraped.
3. Extra wide slide ways and distance between slide ways eliminate sticking problems at low speed travel while ensuring high stability.
4. The major structures are manufactured from Meehanite cast iron with scientific rib reinforcement. This reduces structural deformation to a minimum.
The structural parts are analyzed and designed by the advanced Finite Element Analysis.
Standard Accessories:
Spindle oil cooler unit
Full splash guard
Cutting coolant unit
Heat exchanger in control box
Auto power off
Auto lubrication system
Air blast through spindle
Work lamp
Tool box and tools
Rigid tapping
Mechanical, electrical operating manuals
RS-232 Interface
Transformer
Optional Accessories:
Spindle 10, 000/12, 000 RPM
Index table(320, 250)
(The fourth axis: Including manual type tailstock, oil tank, motor, driver )
Carousel type ATC(16, 20tools)
Arm type ATC(24 tools)
Screw type chip conveyor
Link chain type conveyor
AVR voltage regulator
Rear coolant flushing device
Coolant throught tool holder
Spindle oil cooling device
CE certificate.
Parameter:
| Model | CMV-1100 | ||
| TRAVEL | BOX WAY | ||
| X axis travel | mm | 1000 | |
| Y axis travel | mm | 560 | |
| Z axis travel | mm | 560 | |
| Distance from table surface to spindle nose | mm | 150-710 | |
| TABLE | |||
| table area | mm | 1200 x 650 | |
| Max. load of table | kgs | 800 | |
| T-slot | mm | 5 x 18 x 100 | |
| SPINDLE | 8000 RPM Standard | ||
| Spindle taper | BT-40 | ||
| Spindle speed | rpm | 8000(10000/12000) | |
| Spindle drive | Gear type/Direct drive | ||
| Spindle motor | kw | 11kw | |
| Spindle cooling | Oil cooler | ||
| FEED RATE | |||
| Rapid traverse(X, Y) | m/min | 18 | |
| Rapid traverse(Z) | m/min | 18 | |
| Cutting feed rate | mm/min | 1-10000 | |
| 3 Axes motor output(X, Y, Z) | kw | 3.0kw | |
| A. T. C. | |||
| Magazine type | type | Carousel | Arm |
| Tool magazine capacity | pcs | 16(20) | 24 |
| Max. tool diameter | mm | 100/150 | 80/150 |
| Max. tool length | mm | 300 | 300 |
| Max. tool weight | mm | 7 | 7 |
| Tool selection | kgs | Fixed type | Random |
| OTHER | |||
| Power consumption | KVA | 20 | |
| Floor space(LxWxH) | mm | 2919 x 2415 x 2600 | |
| Machine weight | kgs | 7500 | |
