Audited Supplier
CHB38H
Rotary Encoder
Incremental
Non-Contact
Magnetoelectric Type
Open Collector Output
Solid Shaft
SMD
Axle Sleeve Type
C-Lin
Servo Installation Type
Ф8mm
DC5-24V
C-lin
Canton Box
Dia. 38mm
China
8543709990
Product Description
Product Description
Incremental model encoder is a speed and displacement sensor integrating optical, mechanical, electrical technologies, when the encoder drives the optical grating disk to rotate, the length, angle, speed can be measured accurately by converting the grating lines number into pulses numbers.
Model Meanings:
Specification
CHB38H series
| Model | CHB38H-N/E/F/L-(100,200,360,400,600,800,1000,1024,2000,2500) |
| Main size | External diameter:φ38mm; Shaft inner diameter:φ8mm |
| Working power | DC5V-24V |
| Output mode | N: Open-collector output (NPN) |
| E: Voltage output | |
| F: Complementary output | |
| L: Drive output | |
| Pulse output | 100,200,360,400,600,800,1000,1024,2000,2500 |
| Output phase | A B Z or A B Z -A -B -Z |
| Termination mode | G:Side entry cable |
| Application | Stone machinery, robots and other automation fields |
Product packing
Our factory
Precaution
1). This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2). When mounting this product, if decentering tolerance or declination tolerance is too big, may
result in reduce its working life.
3). Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high
temperature, high humidity and acid-alkaline environment.
4). Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices
connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices
0.5S before turning OFF the encoder.
5). After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6). If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7). When wiring the cable, be sure no short connect between each cable, do not make mistakes in the
wiring, otherwise the encoder may be damaged.
It is suggest to make proper insulation for the cable which is not required for connection
9. Precaution
8). Shielded cable should be proper grounded.
9). Do not disassembly the product
Please contact us for more product information
Our Experimental Center Testing Device
Our Automatic Production Line
