Audited Supplier
DFS07-003
off-White Powder
1.59
9-11
SHARKCMC L
25 Kg Sack
China
Product Description
Product Description
SHARKCMC® L filtration control additive is a technical-grade low-viscosity sodium carboxymethyl cellulose used to reduce filtration in fresh water and seawater mud systems up to 250°F. It is less effective in brines and saltwater and is not generally recommended to be used if the salinity exceed 50,000 ppm. SHARKCMC® L is used in high-viscosity, high solids or heavily weighted fluids and produces only slight increases in viscosity. Subject to bacterial degradation, a biocide should be used to prevent fermentation. SHARKCMC® L treated systems should be pretreated with either sodium bicarbonate or possibly citric acid prior to drilling cement.
Applications/Functions
- Control filtration rates with minimal viscosity increase in freshwater and seawater mud systems
- Deflocculate some seawater muds when used in low concentrations
Advantages
- Temperatures stable up to 250°F
- Widely available and an economic source of polymer fluid-loss control
- Concentrated chemical, very effective at small treatment levels
Typical Properties
- Appearance: Off-white powder
- Specific gravity: 1.59
- pH (5% aqueous solution): 9-11
Recommended Treatment
- Freshwater: 0.5-1.5 ppb
- Seawater: 2-3 ppb
- Add slowly through a mixing hopper at a rate of 10-20 min/sack
Package
- 25 KG SACK
| No. | Product Code | SHARK | Product Description | Applications/Functions |
| 32 | DFS07-001 | SHARKPAC® L | Low Viscous Polyanionic Cellulose | Filtration Control Agent for water based mud with minimal viscosity increase up to 300°F ,,150ºC |
| 33 | DFS07-002 | SHARKPAC® R | High Viscous Polyanionic Cellulose | Filtration Control and viscosifier agent for water based mud up to 300°F ,,150ºC |
| 34 | DFS07-003 | SHARKCMC® L | Low-viscosity, technical grade sodium carboxymethyl cellulose for filtration control - | Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase, salinity tolarant to 50,000ppm ,,50,000ppm,120ºC |
| 35 | DFS07-004 | SHARKCMC® H | High-viscosity, technical grade sodium carboxymethyl cellulose for filtration control and supplemental viscosity - | Filtration Control and viscosifier agent for water based mud up to 250°F, salinity tolarant to 50,000ppm ,,50,000ppm,120ºC |
| 36 | DFS07-005 | SHARKSTAR® | Pregelatinized modified starch | Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase ,,120ºC |
| 37 | DFS07-006 | SHARKSTAR® HT | Modified polysaccharide/ tapioca starch / | Filtration Control Agent for water based mud up to 325°F with minimal viscosity increase,,160ºC |
| 38 | DFS07-007 | SHARKSTAR® N | Hydroxypropyl carboxymethyl starch/Cross-linked starch / | Reduce filtration in reservoir sections up to 300°F,150ºC |
| 39 | DFS07-008 | COPOTROL® | Sodium polyacrylate copolymer | High-temp fluid loss and rhelogy stabilizer for low calcium, low solids or non-dispersed muds up to 400°F ,,,200ºC |
| 40 | DFS07-009 | WHITEMP® | AAM-AMPS copolymer / | HPHT filtration control for WBM up to 400°F, white free-flowing powder ,200ºC, |
| 41 | DFS07-010 | WHITETROL® X | AM - AMPS copolymer -AMPS | HPHT filtration control for WBM up to 500°F, white free-flowing powder ,260ºC, |
| 42 | DFS07-011 | BLACKLEO® | Highly-oxidized leonardite | High-temp WBM fluid loss, thinner, emulsifier for oil in water emulsions up to 400°F ,,,200ºC |
| 43 | DFS07-012 | BLACKFLO® | Sulfonated Lignite | Highly sulfonated lignite polymer for HT WBM fluid loss, thinner, soluble in high brines, combination with BLACKTEMP for best performance up to 400°F,,,,,200ºC |
| 44 | DFS07-013 | BLACKTEMP® I | Sulfonated methypheuo formald-ehyde for freshwater and brine fluids , | High-temp fluid loss control with minimal rheology increase used for freshwater and brine fluids up to 450°F. Salinity tolerant to 120,000ppm and calcium resistant to 2000ppm, dark brown powder.,,,230ºC,120,000ppm,2000ppm, |
| 45 | DFS07-014 | BLACKTEMP® II | Sulfonated methypheuo formald-ehyde for saturated brine , | High-temp fluid loss control with minimal rheology increase used for saturated brine and formate brine up to 400°F. Salinity tolerant to 120,000ppm and Ca ion resistant to 2000ppm, dark brown powder. ,,200ºC, |
| 46 | DFS07-015 | BLACKTEMP® III | Sulfonated methypheuo formald-ehyde for saturated brine , | High-temp fluid loss control with minimal rheology increase used for saturated brine and formate brine up to 400°F. Salinity tolerant to 120,000ppm and Ca ion resistant to 2000ppm, dark brown powder. ,,200ºC, |
| 47 | DFS07-016 | BLACKNEX® | Resinated Lignite | High-temp fluid loss control and rheology stabilizer for all WBM up to 425°F with chlorides below 70,000ppm and hardness not exceeding 3,000ppm,,220ºC,70,000ppm,3,000ppm. |
| 48 | DFS07-017 | BLACKLIGO® 350 | Organophilic leonardite | HPHT filtration control for OBM up to 350°F, alternative to asphalt and gilsonite products ,180ºC, |
| 49 | DFS07-018 | BLACKLIGO® 400 | Organophilic leonardite | HPHT filtration control for OBM up to 400°F, alternative to asphalt and gilsonite products ,200ºC, |
| 50 | DFS07-019 | BLACKTROL® 350 | Gilosnite - Soften point 350°F - 180ºC | HPHT filtration control for OBM, soften point >350°F ,>180ºC |
| 51 | DFS07-020 | BLACKTROL® 400 | Gilsonite -Soften point 365-420°F - 185-215ºC | HPHT filtration control for OBM, Soften point: 365-420°F ,:185-215ºC |
| 52 | DFS07-021 | BLACKTROL® HP | Emulsified gilsonite - Soften point 250-420°F -:121-215ºC | HPHT filtration control for WBM, excellent dispersion, Soften point: 250-420°F ,:120-215ºC |
| 53 | DFS07-022 | BLACKSULA® | Sulfonated Asphalt - Economical - | HPHT filtration control for both WBM and OBM up to 350°F, shale stabilizer. Prevent shale hydration and sloughing as well as decrease cuttings erosion ,,180ºC,,,, |
| 54 | DFS07-023 | BLACKSULA® PLUS | Sulfonated Asphalt - Premium - | Shale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control in both WBM &OBM up to 500°F. Partially soluble in water and oil, star product for 35 years. ,,,,260ºC,,,,35 |
| 55 | DFS07-024 | LIQUITROL® | Liquid polymer for OBM - | Liquid filtration reducer in NAF up to 350°F. Reduce the requirement of organoclay. ,,180ºC,, |
| 56 | DFS07-025 | LIQUITROL® HT | Liquid polymer for OBM - | Liquid filtration reducer in NAF up to 400°F. Reduce the requirement of organoclay. ,,200ºC,, |
| 57 | DFS07-026 | PURETROL® | Cross-linked polymer for OBM | Primary filtration control agent for HPOBM up to 300°F, alternative to amine lignite and gilsonite,white powder,150ºC,, |
| 58 | DFS07-027 | PURETROL® HT | Cross-linked polymer/Vinyl toluene-acrylate copolymer / | Primary filtration control agent for HPOBM up to 500°F, alternative to amine lignite and gilsonite,white powder ,230ºC,, |
| 59 | DFS07-028 | NMSHIELD® | NANO-Technology particles | Versatile product to provide HT filtration control, improved fluids lubricity, strengthen wellbore and increase fracture breakdown pressure in sandstones and shales for both WBM and OBM up to 450°F. D50 is only 200nm. ,,,,,230ºC,200 |
| 60 | DFS07-029 | LATISEALTM | Alternative of sulphonated asphalt | Environmental-friendly white powder product that functions as alternative of sulphonated asphalt.Thermal stable up to 325°F ,160ºC |
