Audited Supplier
According to Customers'
Rework If The Problem Is Due to Our Responsibility
Rework If The Problem Is Due to Our Responsibility
New
RoHS, ISO9001
DIN, ASTM, GB, JIS, ANSI
Customized
Alloy
Optic Device
Available
Available
Multi-Option
Carton
Wuhan, China
8401200000
Product Description
Note: The products that are exhibited in this site are just sample parts we once machined according to customers' drawings, or the ones that we are able to machine, and the prices shown are NOT the real prices, and some descriptions of products are just general information rather than the particular ones for the specific parts. We do custom machining service for customers and quote the prices according to the drawings of specific parts provided by the customers.
Our Procedure for Customizing Parts for You Is as Follows:
Description of This Part in the Picture
Material:
2A12-T4
Product Use:
Holder for optical lens
Machining characteristics:
1.Lathe rough turning, stock left out.
2. CNC 4-axis rough machining.
3.Aging treatment to fully remove the cutting stress in the workpiece.
4.Lathe finish machining, dimensions machined to the requirement, cylindricity of installation positions of internal optical components is within 0.007mm, and concentricity within 0.01mm.
5.The shaft is to be finished by milling inside and outside the workpiece, and the position accuracy, perpendicularity and flatness shall be within 0.02mm.
Surface Treatment:
Black anodizing, meeting the requirements of environmental protection
Inspection:
The places where accuracy is required meet the requirements of drawing, and the flatness and perpendicularity are within 0.02mm, and cylindricity 0.007mm, and co-axiality 0.01mm. it is inspected with CMM, and finished product reports from CMM are generated.
General Information of Our Products and Services
1. Scope of Typical Parts
Parts of automation equipment, lasers, optical fiber electronics, optical lens, infrared thermal imaging devices, automobile and so on.
2. Scope of Workpiece Materials
Metal materials: stainless steel, aluminum, aluminum alloy, magnesium alloy, brass, mild steel, Cr12, SKD11 and so on.
Non-metal materials: POM, ABS, acrylic, nylon, PC, PMMA, Bakelite, PEEK, Teflon and so on.
3. Machining Methods
Milling, turning, medium-speed wire cutting, slow-speed wire cutting, grinding, turning and milling forming)
4. Tolerance Ranges
Metal Machining: 0.01mm, depending on the product.
Non-metal Machining: 0.02mm, depending on the product.
5. Surface Roughness Range
Ra < 0.8, depending on the product and material.
6. Workpiece Size Range
10-500mm
7. Surface Treatment Options
Aluminum alloy: black oxidation, natural color oxidation, color oxidation, hard oxidation, micro arc oxidation, conductive oxidation.
Stainless steel: passivation, black zinc plating, blackening, PVD.
Steel: blackening, bluing, chromium plating, nickel plating, black zinc plating, color zinc plating, white zinc plating, paint copper: gold plating, silver plating, blackening, passivation, etc.
8. Lead Time for Samples or Prototypes
It takes about 15 days for production, depending on the product.
9. Lead Time for Formal Orders
It's determined according to order quantity and other requirements.
10. MOQ
5 pieces.
11. Payment Terms
Normally, T/T 30% is to be prepaid and balance paid before shipment for the first order, or decided by negotiation.
12. Transportation
0.1-150 KG: DHL air freight is prioritized.
Over 150 KG: Air or ocean freight with customs declaration.
13. Packaging
Foam sealing, independent carton, self-sealing bag, oil paper, vacuum packaging, etc.
14. Options of Transportation Companies
Air Freight: Fedex, DHL, UPS, TGL, etc .or according to customer's requirement.
Ocean Freight: DIMERCO, Agility, or according to customer's requirement.
15. Port of Delivery
Shanghai, or according to customer's requirement.
Our Procedure for Customizing Parts for You Is as Follows:
- Customer provides 2D or 3D drawings;
- We quote the prices according to your drawings(we can also design the parts according to your specific requirements);
- Orders are confirmed by both parties;
- We start to put your parts into machining;
- We package and deliver the parts the customer;
Description of This Part in the Picture
Material:
2A12-T4
Product Use:
Holder for optical lens
Machining characteristics:
1.Lathe rough turning, stock left out.
2. CNC 4-axis rough machining.
3.Aging treatment to fully remove the cutting stress in the workpiece.
4.Lathe finish machining, dimensions machined to the requirement, cylindricity of installation positions of internal optical components is within 0.007mm, and concentricity within 0.01mm.
5.The shaft is to be finished by milling inside and outside the workpiece, and the position accuracy, perpendicularity and flatness shall be within 0.02mm.
Surface Treatment:
Black anodizing, meeting the requirements of environmental protection
Inspection:
The places where accuracy is required meet the requirements of drawing, and the flatness and perpendicularity are within 0.02mm, and cylindricity 0.007mm, and co-axiality 0.01mm. it is inspected with CMM, and finished product reports from CMM are generated.
General Information of Our Products and Services
1. Scope of Typical Parts
Parts of automation equipment, lasers, optical fiber electronics, optical lens, infrared thermal imaging devices, automobile and so on.
2. Scope of Workpiece Materials
Metal materials: stainless steel, aluminum, aluminum alloy, magnesium alloy, brass, mild steel, Cr12, SKD11 and so on.
Non-metal materials: POM, ABS, acrylic, nylon, PC, PMMA, Bakelite, PEEK, Teflon and so on.
3. Machining Methods
Milling, turning, medium-speed wire cutting, slow-speed wire cutting, grinding, turning and milling forming)
4. Tolerance Ranges
Metal Machining: 0.01mm, depending on the product.
Non-metal Machining: 0.02mm, depending on the product.
5. Surface Roughness Range
Ra < 0.8, depending on the product and material.
6. Workpiece Size Range
10-500mm
7. Surface Treatment Options
Aluminum alloy: black oxidation, natural color oxidation, color oxidation, hard oxidation, micro arc oxidation, conductive oxidation.
Stainless steel: passivation, black zinc plating, blackening, PVD.
Steel: blackening, bluing, chromium plating, nickel plating, black zinc plating, color zinc plating, white zinc plating, paint copper: gold plating, silver plating, blackening, passivation, etc.
8. Lead Time for Samples or Prototypes
It takes about 15 days for production, depending on the product.
9. Lead Time for Formal Orders
It's determined according to order quantity and other requirements.
10. MOQ
5 pieces.
11. Payment Terms
Normally, T/T 30% is to be prepaid and balance paid before shipment for the first order, or decided by negotiation.
12. Transportation
0.1-150 KG: DHL air freight is prioritized.
Over 150 KG: Air or ocean freight with customs declaration.
13. Packaging
Foam sealing, independent carton, self-sealing bag, oil paper, vacuum packaging, etc.
14. Options of Transportation Companies
Air Freight: Fedex, DHL, UPS, TGL, etc .or according to customer's requirement.
Ocean Freight: DIMERCO, Agility, or according to customer's requirement.
15. Port of Delivery
Shanghai, or according to customer's requirement.
