Audited Supplier
Customized metal stamping parts for vehicle, car, trucks
| Applicaton | The tool applicated to automotive stamping part mass production |
| Service | metal stamping parts, CNC machining, welding, milling, laser cutting |
| Equipments | stamping machine, press machine, laser cutting machine, welding line, CNC machining center, CMM testing machine, Faro scaner |
| Surface treatment | Titanium plating, Electro-plating, Powder coating, Polishing |
| Steel Forming punch | PVD, SKD11+TD |
| Standard Components | Most of standard parts are sourced from MISUMI and PUNCH, gas spring are sourced from HYSON |
In the stamping production of progressive stamping die, it is necessary to carry out specific analysis for the phenomenon of poor stamping, adopt effective treatment measures, and fundamentally solve the problems that occur, so as to reduce production costs and achieve smooth production.
The following is the reason for the common bad stamping phenomenon in production and treatment measures are as follows, for the tool maintenance personnel to refer.
The progressive stamping punching edge
Cause:
1) The cutting edge wear
2) The gap is too large to repair the cutting edge after the effect is not obvious
3) The cutting edge collapse angle
4) The gap is unreasonable up and down offset or loose, up and down dislocation.
Countermeasure:
a. Grinding the cutting edge.
b. Control the precision of the convex and concave die machining or modify the design gap.
c. Grind the cutting edge.
d. Adjust the punching clearance to confirm the problem of the hole wear of the template hole or the processing precision of the molded part.
e. Replace the guide or remodeling.
Specialize in the design, development, manufacture, assembling, try out and shipment.
Meilin has three wrokshops, of which Huizhou Meilin has a total investment of 150 million RMB, a plant area of 16,600 square meters, with 130 employees (45 senior engineers and designers), and an annual production of 450 sets of molds
Wuhan Meilin has an annual production of over 450 sets of metal molds and 5.6 million sets of stamping products.
Our Advantages:
We have obtained ISO/9001 Quality Management System Certification.
Our factories have professional production and processing equipment & assembly line and advanced testing facility for Auto stamping part.
We attach great importance to the quality of personnel and staffs. Meilin people will never change the pursuit of better quality and further development.
Q:The working flue of the metal stamping parts.
A: First step , the customer need to provide drawing to make the tooling, then produce sample for the customer to test. when the customer confirm the quality and details without any issue, then the bulk production will be arranged.
Q:what is the delivery time of the sheet metal fabrication parts?
A:Tooling delivery time is about 35-90 days , the mass production delivery time will see the quantity and the product complication.
A:Sure, we have more than 30 designers and more than 30 engineers to provide full technical support for your work.
