Audited Supplier
Specifications
CNC slitting folding machine
1.Throat Depth:1000mm
2.Max.bending angle:125dgree
General Parameter
| 1 | Material | PPGI,Carbon Steel; Aluminum; Stainless Steel |
| 2 | Thickness | PPGI&Carbon Steel: 1.2mm Aluminum:1.2mm Stainless Steel:1.0mm |
| 3 | Feeding width | Max 1000mm |
| 4 | Power | Driven by Servo motor, pump motor: 0.82KW |
| 5 | Working length | 8M |
| 6 | Press clamp | 9 units |
| 7 | Weight: | Approx 3000kg |
| 8 | Pressing power | pump motor for hydraulic station7.5KW(Located inside) |
| 9 | Bending Range | 0-125 Degree |
| 10 | Depth of throat | 1000 mm (Max. working width of material in clamp) |
| 11 | Hinge | 9 groups |
| 12 | Total power | 9.42kw (7.5KW+1.1KW+0.82KW) |
| 13 | Outline dimension(Length×Width×Height): | 5800×1700×1500 (For reference only) |
| 14 | Type of Blade | Slitting Wheel |
Machine Components
a.Slitting Device
1).Diameter:80 (Enough)
Material:Cr12MoV
2) Drive system:Motor driving, 1.1KW
Guiding device:Steel rope circling
3) Slitting speed:Approx.0.8m/s
Slitting distance: Through steel rope circulation.
b.Bending & Slitting Device
1) Max. Bending thickness 1.0mm
2) Max. Bending length 8000mm
3) Max. Slit thickness 1.0mm
4) Min. folding dimension TBC
c.Hydraulic power pack
1)Capability:Max.16MPA
2)Capacity of oil tank: 170L
3)Power source:Hydraulic
d.PLC Control System
1)System:Siemens PLC Control
2)Numerical control locating system:Siemens PLC Control
3)Operating table:Touch Screen
4)Angle programmer:Encoder test
5)Slitting control:Manual
6)Emergency stop: e-stop button+ e-limit+ foot switch (right heavily)
Slitting wheels on folding machine
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
- Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
- Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
