Audited Supplier
2-WE67K-500X7000
New
ISO 9001:2000, ISO 9001:2008, CE
Semi-Automatic
Rubber, Copper, Aluminum, Carbon Steel, Stainless Steel
Cnc Bending Machine
Tander Prss
1000kn
2X7000mm
5600mm
HAVEN
Steel Pallet
Total 10000t, 14000mm
China
8459
Product Description
CNC lamp pole and street pole bending machine Hydraulic Press Brake Machine in tandem 2-WE67K-500X7000
1 The frame of machine is composed of tank, worktable, left and right housings and RAM. So it has high strength and good rigidity. Also it takes vibration to eliminate Stress.
2 Synchronization working principal of both machines: Adopting electric-hydraulic Proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of RAM continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to "C" plates, not on housing plates directly, the deflection of RAM and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of RAM could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.
Specification:
1 The frame of machine is composed of tank, worktable, left and right housings and RAM. So it has high strength and good rigidity. Also it takes vibration to eliminate Stress.
2 Synchronization working principal of both machines: Adopting electric-hydraulic Proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of RAM continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to "C" plates, not on housing plates directly, the deflection of RAM and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of RAM could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.
Specification:
| Type | Mult-machine Tandem Hydraulic CNC electro-hydraulic synchro | |
| Working force | 2X500Ton | |
| Length of table | 2X7000mm | |
| distance between frames | 5600mm | |
| Throat depth | 1000mm | |
| Open height | 1000mm | |
| Stroke | 320mm | |
| Working Speed | Unload | 70mm /s |
| Working | 7mm /s | |
| Return | 60mm /s | |
| Main motor | 2x45kw | |
| CNC system | Type: DELEM DA52 Delem Co., Netherlands 2 axis(Y1,Y2) +Automatic crowning system | |
| Tool | With 1 punching and 1 multi V block bottom die for making octagonal taper type pole. With front and back sheet supporting stand | |
| Seal in the cylinders | NOK, made in Japan | |
| Hydraulic components | BOSCH-Rexroth - , Germany | |
| Hydraulic pump | Nitch , Japan, or BOSCH , Germany, | |
| Linear Raster displayer sensor | HEIDENHAIN, GERMANY | |
| Main Electric Elements in cabinet | Schneider | |
| Gross weight | 2x 68000kg(net 62000kg) | |
| Overall size(mm) LxWxH | 2x7250x5170x6100 | |
| Packing: | With plastic cover The machine should be disassembled during transportation. Our engineer should go to customer to assemble and adjust it. Transportation: | |
