


1. Wide range: Carbon dioxide laser can carve and cut almost any non-metallic material. And the price is low!
2. Safe and reliable: Adopting non-contact processing, it will not cause mechanical compression or stress on the material. No knife marks, no damage to the surface of the workpiece; Will not deform the material;
3. Accurate and meticulous: the machining accuracy can reach 0.02mm;
4. Conservation and environmental protection: The beam and spot diameter are small, generally less than 0.5mm; Cutting processing saves materials, ensuring safety and hygiene;
5. Consistent effect: Ensure that the processing effect of the same batch is completely consistent.
6. High speed and speed: It can immediately perform high-speed carving and cutting according to the computer output pattern.
7. Low cost: Not limited by the quantity of processing, laser processing is cheaper for small batch processing services.

Laser power | 30W-300w |
Cutting speed | 0-800mm/s |
Drive motor | stepping motor |
Cooling method | Water cooling |
Working voltage | 220V/380V |
Operating temperature | 0-45 |
Operating humidity | 5%-95% |
Resolution | 1000DPI |
Compatible software | AutoCAD,Core draw ,AI.etc |
Repeatability | ±0.05mm |
Working platform | Honeycomb, blade, conveyor belt |
Graphic format supported | JPG,BMP,DXF,PLT,DST,AI |