Audited Supplier
RD-CPP
PP
Packaging Film
Casting
Transparent
Moisture Proof
Soft
6 Inch Paper Core
REYDA
Standard Export Packaging
customized specification
China
39202090
Product Description
CPP film namely Cast Polypropylene film mainly for print and lamination grade, metalisablle grade for metalized CPP film, retort grade CPP film
CPP film (cast Polypropylene film) is a three layers Co-extrusion cast Polypropylene film,and film have lower haze,high slip,and good moisture barrier,and low heat sealing temperature properties
1.Thickness Range: 20-90 um
2. Width Range: 350-3500mm;
3. Type: MCPP, RCPP(Steaming and boiling type), GCPP
Cast Polypropylene film
Application: CPP is a three layer Co-extrusion cast Polypropylene film,it have lower haze,high slip,good moisture barrier,and low heat sealing temperature properties,can be dry laminated with BOPP film,bopet film for food ,medicine and commodity packaging
Character :
-Good transparency
-High slip
-1-side corona treatment
Typical performance
1, MD machine direction TD transverse direction
2,the value is typical, not the standard .
CPP film (cast Polypropylene film) is a three layers Co-extrusion cast Polypropylene film,and film have lower haze,high slip,and good moisture barrier,and low heat sealing temperature properties
1.Thickness Range: 20-90 um
2. Width Range: 350-3500mm;
3. Type: MCPP, RCPP(Steaming and boiling type), GCPP
Cast Polypropylene film
Application: CPP is a three layer Co-extrusion cast Polypropylene film,it have lower haze,high slip,good moisture barrier,and low heat sealing temperature properties,can be dry laminated with BOPP film,bopet film for food ,medicine and commodity packaging
Character :
-Good transparency
-High slip
-1-side corona treatment
Typical performance
| Item | Test Method | Unit | Typical Values | |||
| Thickness | ASTM D 2673 | mil (mic) | 0.8(20) | 1.0(25) | 1.2(30) | |
| Density | ASTM D 792 | g/cm3 | 0.90 | 0.90 | 0.90 | |
| Haze | ASTM D 1003 | % | 2.4 | 3.4 | 3.8 | |
| Gloss | ASTM D2457 | 45o | 85 | 85 | 85 | |
| Tensile strength | MD | ASTM D 882 | psi | 8800 | 8500 | 8400 |
| TD | 5100 | 5000 | 4950 | |||
| Elongation at break | MD | ASTM D 882 | % | 550 | 580 | 600 |
| TD | 670 | 680 | 700 | |||
| Secant Modulus | MD | ASTM D 882 | psi | 88000 | 85000 | 84000 |
| TD | 77000 | 75000 | 74500 | |||
| C.O.F | ASTM D 1894 | -- | 0.22 | 0.22 | 0.20 | |
| Wetting tension | ASTM D 2578 | Dyne/cm | 38 | 38 | 38 | |
| Heat seal temperature | SJ Method | ºC | 132 | 132 | 132 | |
| WVTR | ASTM F 1249 | g/100in2/24h | 1.0 | 0.8 | 0.67 | |
| OTR | ASTM D 3985 | cc/100in2/24h | 240 | 190 | 160 | |
2,the value is typical, not the standard .
