Audited Supplier
| Model | Tax feedsize(mm) | Capacity(t/h) | Power(kt) | Rotation Speed |
| CV-7 | 35 | 55-120 | 55-110 | 1175-2050 |
| CV-8 | 50 | 113-240 | 150-264 | 1460-1720 |
| CV-10 | 60 | 220-380 | 320-500 | 1242-1460 |
| CV-12 | 60 | 300-380 | 500-630 | 850-1150 |
1.The hammer head is fitted with an alloy blade for extended service life.
2.Thin oil lubrication system, to solve the problem of spindle lock.
3.The attached channel feed is organized and adjustable.
4.Motor base elastic reinforcement device, more stable operation.
5.Self lift cover system, more convenient maintenance.
1. Bearing for the full load of the machine, so good lubrication of bearing life, it directly affects the service life and operation rate of the machine, thus requires the injected lubricating oil must be clean, sealing must be good, the main oil injection of the machine, rotating bearings, roller bearings, all gears, movable bearings, sliding plane.
2. The newly installed wheel hoop is prone to loosen and must be checked frequently.
3. Pay attention to whether all parts of the machine are working normally.
5. Put the bottom plane of the bottom frame of the moving device, and the dust and other objects should be sent out to avoid the moving bearing can not move on the bottom frame when the machine encounters the material that cannot be broken, resulting in serious accidents.
6. If the bearing oil temperature rises, stop and check the cause immediately.
7. If there is an impact sound when the rotating gear is running, it should immediately stop to check and eliminate it.
