Audited Supplier
FRP cable tray is consists of a ventilated or solid bottom contained within longitudinal side members. Provides moderate ventilation with added cable support frequency and with the bottom configuration providing cable support every 4 inches. Available in metal and nonmetallic materials. Generally used with control and instrumentation cables in moderate heat generating applications with short to intermediate support spans of 5 feet to 12 feet. FRP cable tray bottom is available in flat sheet or corrugation that is 3 times stronger and 21 times stiffer than flat sheet bottoms. Corrugated seams between jointing sections eliminate need for bottom seam splices. Load Depths: 3" through 5-1/2" Materials available: Aluminum, hot-dipped galvanized Steel,Stainless Steel or figerglass.
| B(mm) | H(mm) | TH(mm) |
| 100 | 50/100 | 3/3 |
| 150 | 100/150 | 3.5/3.5 |
| 200 | 100/150/200 | 4/4/4 |
| 300 | 100/150/200 | 4/4.5/4.5 |
| 400 | 100/150/200 | 4.5/5/5.5 |
| 500 | 100/150/200 | 5.5/6/6.5 |
| 600 | 100/150/200 | 6.5/7/7.5 |
| 800 | 100/150/200 | 7/7.5/8 |
Features
1.Different sizes(width,height and length) are available. Maximum length of cable tray is 6000 mm.
2.Low cost and easy installation
3.Heavy duty for loading
4.Service time:usually more than 30 years' service time
5.Easy maintenance
Advantages
1.high mechenical strength
2.light weight and low cost
3.high load bearing
4.resistance for chemical corrosion effectively
5.easy for installing
6.good looking
7.convenient for maintaining
8.good at electrical insulation
9.fire-resistant
Applications
1.Widely used in some environment with high corrosion such as petroleum industry, chemical industry, sewage disposal and electrical plant
2.suitable for electronic cable, control cable, lighting cable, etc
