Audited Supplier
CanPFN
Orthopedic Implant and Instrument
Orthopedic
Titanium
Disposable
CE, ISO13485
Adult
Canwell
Export PE Inner Bag+PE Outer Bag+Carton
Diameter 9/10/11mm, Length 170-420mm
China
90211000
Product Description
CANWELL MEDICAL
Leading The Way To A Healthy World
Leading The Way To A Healthy World
| Description | Qty. | Description | Qty. |
| Hexagonal Solid Screwdriver | 1 | Guide Wire, Ø3.2×400mm | 5 |
| Insertion Handle | 1 | Depth Gauge For Guide Wire, Ø3.2mm | 1 |
| Distal Aiming Connecting Shaft | 1 | Cannulated Drill Bit For Cortex Bone, Ø10.6/Ø3.2mm | 1 |
| Buttress Nut For Proximal Aiming Arm | 2 | Cannulated Drill Bit With Limit, Ø10.6/Ø3.2mm | 1 |
| Protection Sleeve For Distal Locking | 2 | Fixation Sleeve, SW4.5/Ø3.2mm | 1 |
| Obturator For Distal Locking | 2 | Screwdriver For Pfn Blade | 1 |
| Trocar For Distal Locking | 1 | Extractor Connection Shaft For Blade | 1 |
| Compression Nut | 1 | Counter-Torque Wrench For Blade | 1 |
| Protection Sleeve For Blade | 1 | Drill Bit, Ø4.3mm | 3 |
| Protection Sleeve For Lag Screw | 1 | Pin Wrench, SW3/SW5 | 1 |
| Obturator For Blade | 1 | Depth Gauge For Locking Screw | 1 |
| Obturator For Lag Screw | 1 | Screwdriver, Hexagonal, SW3.5 | 1 |
| Protection Sleeve For Lag Screw | 1 | Wrench With T-Handle | 1 |
| Trocar | 1 | Extractor For Nail, M8 | 1 |
| Connecting Nut | 1 | Guide Wire With Hook, Ø2.8mm | 1 |
| Aiming Arm For Distal Locking | 1 | Cannulated Screwdriver For End Cap, Ø2.8/SW4/SW11 | 1 |
| Universal Chunk With T-Handle | 1 | Cannulated Wrench For End Cap, SW11 | 1 |
| Radiographic Ruler | 1 | Extractor For Blade, SW4.5/Ø3.2mm | 1 |
| Protection Sleeve | 1 | Cleaning Wire | 1 |
| Drill Sleeve | 1 | Lag Screw Holding Shaft | 1 |
| Protection Drill Sleeve, Ø5.2mm | 1 | Wrench Shaft For Lag Screw | 1 |
| Temporary End Cap For The Lag Screw | 1 | Proximal Aiming Arm | 1 |
| Obturator | 1 | Distal Targeting Device For Long Nail | 1 |
| Drill Bit, Ø5.2mm | 1 | Targeting Device Nut For Long Nail | 1 |
| Flat Drill With T-Handle | 1 | Distal Outrigger | 1 |
| Proximal Reamer | 1 | Distal Outrigger Nut For Long Nail | 1 |
| Awl | 1 | U-Shaped Stabilizing Spacer | 1 |
| Impactor | 1 | Location Shaft | 1 |
| Quick Connection T-Handle | 1 | Slotted Hammer | 1 |
| Ratchet Wrench For Nut, Hexagonal | 1 | Handle Connecting Nut | 1 |
| Location Sleeve | 1 | Instrument Tray | 1 |
| Total amount | 1 | ||
CANWELL Medical
A medical device company founded in 1994 is now one of China's largest designers, manufacturers, and suppliers of orthopedic implants and instruments. We have over 60,000 square meters of workshop. We are a long-term instrument contract manufacturer of USA top orthopedic companies. Our Canwell own brand product lines include traumatology, spinal fixation system, and surgical instrument, covering products such as femoral nails, titanium plates, and screws, pedicle screws with rods, PEEK cages, balloon kyphoplasty for spine fracture, and other instrument sets, already sell in China, Europe, Latin America, the Middle East, and Asia...
Q: Would you please give some information on shipping mode and charges?
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE ?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have a CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller sample orders in the beginning in order to test market our products. Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for the listed products, or they are newly produced?
A: Generally, we have stock for every listed product, which is produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE ?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have a CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller sample orders in the beginning in order to test market our products. Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for the listed products, or they are newly produced?
A: Generally, we have stock for every listed product, which is produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.
