Audited Supplier
Steel
High Temperature Piping
Ultra High Pressure Piping
ASTM, GB, API, DIN, JIS
Liquid
Round
Thread
as Requirements
INNOVAT/OEM
Carton
based on customer requirements
China
6810999000
Product Description
Bridge slot water well screen pipe:
The sand and gravel can't easily block the slot because of bridge slotted screen's special bridge slot design. Bridge type water well screen slotted pipe has great mechanical strength and water entering capacity. Meanwhile, bridge type water well screen slotted pipes use steel punching technology and rolled in many ways, so bridge slotted screen is light, cheap and easily operating. We use Computerized Numerical Control to punch the productive process, so the slot size can be changed as your requirements. In order to give customers more convenience, we can offer any diameter bridge type water well screen slotted pipe, we also offer galvanized bridge slotted screen pipes to prolong the operational life.
Basic material----
Stainless steel, different qualities depending on ground water properties and temperature.
Steel - mild steel, preferably S235JR or similar steel with good weldability properties. Suitable for drawdown wells. Not approved for drinking water.
Steel - galvanized, S235JR as base material. Only suitable to a limited extent for contact with drinking water.
Steel - coated plastic , S235JR as base material, Rilsancoated, approved for drinking water. Meets the KTW recommendation of the German Federal Department of Health.
Steel - mild steel, preferably S235JR or similar steel with good weldability properties. Suitable for drawdown wells. Not approved for drinking water.
Steel - galvanized, S235JR as base material. Only suitable to a limited extent for contact with drinking water.
Steel - coated plastic , S235JR as base material, Rilsancoated, approved for drinking water. Meets the KTW recommendation of the German Federal Department of Health.
The slot width tolerance compliant to DIN is +/- 0.2 mm,
which means the values listed above for the open area are
approximate values.
Approx. 2 mm minimum opening for galvanized and
Rilsan-coated screens, since the bridge openings
could otherwise plug due to the coating process.
| Selection of slot size | |||||
| Aquifer classification | gravel | Rough sand | Medium sand | Fine sand | Mealy sand |
| Screening results (mm) | 1-2.5 | 0.5-1 | 0.25-0.5 | 0.1-0.25 | 0.1-0.25 |
| Bridge slots (mm) | 3 | 1.5-2 | 1 | 1 | 0.75 |
| Filling gravel spec (mm) | 4-20 | 2-8 | 2-3 | 2-3 | 2-3 |
| Filling gravel thickness (mm) | 75-100 | 100 | 100-200 | 100-200 | 100-200 |
Types-----
| The different type of Bridge slot screen pipe | ||||||||||||||||||||
| Diameter(mm) | 146 | 159 | 219 | 273 | 325 | 377 | 426 | 529 | ||||||||||||
| ID(mm) | 130 | 140 | 138 | 200 | 198 | 254 | 250 | 246 | 305 | 300 | 297 | 357 | 350 | 346 | 406 | 400 | 398 | 502 | 500 | 498 |
| Thickness(mm) | 5 | 5 | 6 | 5 | 6 | 5 | 6 | 8 | 5 | 6 | 8 | 5 | 6 | 8 | 5 | 6 | 8 | 6 | 7 | 8 |
| Coupling OD(mm) | 146 | 160 | 162 | 220 | 226 | 274 | 278 | 278 | 325 | 328 | 329 | 377 | 378 | 379 | 426 | 428 | 432 | 529 | 530 | 531 |
The choice of connections largely depends on technical re
quirements such as tensile strength, collapse resistance, and
installation guidelines for construction sites.
In addition, the outer diameter of the respective connection
should be considered also, which is larger than the pipe
diameter.
Overview of connection types----
- High strength through resistance to twisting, compressive, and tensile forces
- A smooth bore that does not impede the passage of probes, tools, etc.
- Formations with large particle sizes
- Large diameter wells
- Low to medium flow rates
