Audited Supplier
DN80
Weld Neck Flange
Spiral Wound Gasket
Raised Face Flat Face RF FF
Forged
High Temperature Piping
Liquid
CHNFLEX
Wooden Case
DN80
China
73079100
Product Description
Long weld neck flange is a type of flange with a higher neck height, which improves the stiffness and load-bearing capacity of the flange. Compared with butt welding flanges, long neck flanges require a larger welding workload, higher electrode consumption, and cannot withstand high temperature, high pressure, repeated bending, and temperature fluctuations. However, its on-site installation is relatively convenient and can omit the process of welding and rubbing, making it popular in practice.
The main characteristics of long weld neck flanges are as follows:
1.Strong corrosion resistance
2.Sturdy structure
3.Easy to install
4.Size standard
5.Wide applicability
| Flange type(Typ) as in parameter table | |||
| 01 | flat face slip on flange | 13 | pipe threaded flange |
| 02 | loose plate flange with weld-on plate collar | 21 | integral flanges |
| 04 | loose plate flanges with weld-neck collar | 32 | weld-on plate collars |
| 05 | high hub blind flange | 33 | lapped pipe ends |
| 11 | raised face weld neck flange | 34 | weld-neck collars |
| 12 | raised face socket weld flange | ||
Note1:Dimensions N1,N2and N3 are measured at the intersection of the hub draft angle and the back face of the flange.Note2:For d1 dimensions see document "Flange Facing Dimensions parameter table "Long neck welding flanges are commonly used in industries with high pipeline requirements and suitable for high temperature and high pressure conditions, such as chemical, petroleum, natural gas, etc. Meanwhile, the characteristics of long neck welded flanges are also applicable to industries such as textiles, food, and shipbuilding.
1.24-hour online
2.Free samples provided
3.Support customization
4.Provide drawings
5.Multiple payment styles to choose from
6.Factory inspection (material, specifications, quantity, pressure, packaging)
7.Long warranty period
8.Suitable packaging for transportation
Q1:What's the material of long weld neck flange?
A1:The material can be Carbon steel, stainless steel, alloy steel...It depends on the working condition.
Q2:What's the working pressure?
A2:The working pressure can be 1.0Mpa, 1.6Mpa, 2.5Mpa
Q3:Can you provide drawings?
A3:Yes,we could provide drawings for you.Please contact us to get the drawings.
Q4:Can we get a sample?
A4:Yes,we could provide samples for you to test the quality.
