Audited Supplier
ZCZHQ
Chemical Tank and Oil Tank
Flange End
Factory Direct Sale
18 Month
Standard
Wcb 304 316L Al
Normal Temperature, Medium Temperature, High Tempe
Gas
Zhenchao
Wooden Cases
2"-24"
Wenzhou, Zhejiang, China
8481804090
Product Description
company size
Zhejiang Zhen chao Petrochemical Equipment Co Ltd.was founded in 2006, located in Oubei,Yongjia, Zhejiang Province.A company specializing in the production of storage tank protection equipment, at present the company mainly deals with:flamearresters, breathing valves, emergency pressure relief manholes, hydraulic safety valves, oil measuring holes and other storage tank accessories.
Product Description
| Product model | ZCZHQ |
| Standard or Nonstandard | Standard |
| medium temperature | Normal temperature, medium temperature, high temperature |
| Use To | Chemical tank and oil tank |
| Connect | Flange end |
| country of origin | zhejiang china |
| Sale Type | Factory Direct Sale |
| Warranty Period | 18 Month |
Product Feature:
Online Pipeline Explosion-proof Flame Arrester
Fire Arrestor is a protective device which use as prevent inflammable gas,fluid's flame spread and avoid temperimg cause to explosion,usually use at beloww conditions:
1.Transport inflammable gas and flammable gas pipelie;
2.Storage petroleum and petroleum product tank;
3.With explosion insecure system vent-pipe;
4.Oil and gas recycling system;
5.Regenerative bolier burning gas pileline net;
6.Gas engine exhaust system;
7.Torch system.
Main technology parameter
Apply to storage flash point lower than 60ºC petrochemical product,such as Gasoline ,kerosene,light diesel oil,toluene etc.
Working temperature≤180ºC
Body material:carbon steel,aluminum alloy,stainless steel:SUS304,SUS304L,SUS316,SUS316L.
Arrestor core material:stainless steel corrugated sheet.
Explosion-proof level:BS5501:IIA,IIB,IIC.
Working pressure:0.6Mpa-5.0Mpa,high pressure should decide by customer.
Maintenance and servicing
Fire arrestor should check every half of a year,check the flame retardant layer core whether block,deformation,corrosion etc.
When find block flame retardant layer core should clean,insure every hole in core are unobstructed,should change the deformation,corrosion flame retardant layer.
Re install the fire resistant layer core parts,should ensure that the combination of surface close not leak.
PRODUCTION PROCESS
TESTING
Delivery conditions and packing
CERTIFICATES
FAQ:
1.Can I get samples from your factory?
Yes, Samples can be provided.
2. What is your MOQ?
Our MOQ is usually 5 CTNS.
3. What is your delievery time?
Our delievery is about 15-30days.
4. What is your payment terms?
We accept T/T, 100% L/C, or West Union and so on.
5. Can we print our logo on your products?
yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
5. Why choose us?
we are a manufacturer, we have manufactured valve for over 20 years .comparing with many factories, our prices are more competitive.
Secondly, We 100% test working pressure for ALL our products.
Finally, After- Services will be highly satisfied. Any problems and feedbacks will be responded efficiently.
Fire Arrestor is a protective device which use as prevent inflammable gas,fluid's flame spread and avoid temperimg cause to explosion,usually use at beloww conditions:
1.Transport inflammable gas and flammable gas pipelie;
2.Storage petroleum and petroleum product tank;
3.With explosion insecure system vent-pipe;
4.Oil and gas recycling system;
5.Regenerative bolier burning gas pileline net;
6.Gas engine exhaust system;
7.Torch system.
Main technology parameter
Apply to storage flash point lower than 60ºC petrochemical product,such as Gasoline ,kerosene,light diesel oil,toluene etc.
Working temperature≤180ºC
Body material:carbon steel,aluminum alloy,stainless steel:SUS304,SUS304L,SUS316,SUS316L.
Arrestor core material:stainless steel corrugated sheet.
Explosion-proof level:BS5501:IIA,IIB,IIC.
Working pressure:0.6Mpa-5.0Mpa,high pressure should decide by customer.
Maintenance and servicing
Fire arrestor should check every half of a year,check the flame retardant layer core whether block,deformation,corrosion etc.
When find block flame retardant layer core should clean,insure every hole in core are unobstructed,should change the deformation,corrosion flame retardant layer.
Re install the fire resistant layer core parts,should ensure that the combination of surface close not leak.
PRODUCTION PROCESS
TESTING
Delivery conditions and packing
| Delivery Time | 15-30days |
| package | Standard Exporting Plywood Case |
| Shipping Port | Shanghai/Ningbo China |
| Shipping Terms | EXW, FOB, CFR, CIF |
| Payment Terms | 30% prepayment, 70% balance paid before shipping |
CERTIFICATES
FAQ:
1.Can I get samples from your factory?
Yes, Samples can be provided.
2. What is your MOQ?
Our MOQ is usually 5 CTNS.
3. What is your delievery time?
Our delievery is about 15-30days.
4. What is your payment terms?
We accept T/T, 100% L/C, or West Union and so on.
5. Can we print our logo on your products?
yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
5. Why choose us?
we are a manufacturer, we have manufactured valve for over 20 years .comparing with many factories, our prices are more competitive.
Secondly, We 100% test working pressure for ALL our products.
Finally, After- Services will be highly satisfied. Any problems and feedbacks will be responded efficiently.
