Audited Supplier
WQD3-7-0.25
7m
3m3/H
Motor
Cast Iron
Single-stage Pump
Liquid Pumps
Electric
Electric Pump
Electric Water Pump
Submersible Pump, Clarified Water Pump
Mechanical Pump
Sewage Water
Wear Pump
Centrifugal Pump
Ce
Al or Copper Wire
1"
South Asia
with or Not
Cast Iron
MEIDEHENG
Carton
Taizhou, China
8413709190
Product Description
WQ(D) Series Sewage Submersible pump
The WQD/WQ Series pumps are widely applied in industry, agriculture, mining, construction, municipal, environmental protection, etc. They are suitable for draining water containing particles such us short fibers, paper scraps,etc, and soft solid, such as muddy water, dirty water, domestic wasterwater, sewage, manure, etc. They are ideal equipment for agricultural irrigation and drainage, pool silt cleaning and construction sites, but not apply to the location with explosion-proof requirements.
2. Double channel impeller, good flow capacity, excellent hydraulic performance.
3. The heat treated steel shaft. Carbide double sides mechanical seals.
Maximum liquid temperature: +40ºC
Maximum ambient temperature: +40ºC
Maximum immersion depth: 5m
Liquid kinematics viscosity: 7x10-7~23 x10-6 m2/s
Maximum liquid density: 1.2x103kg/m2
The grain diameter of suspended solids up to 25mm
Protection class: IP68
Pump body: Cast iron
Motor bracket: Cast iron.
Impeller: Cast iron
Motor shaft: The heat treated steel shaft
Mechanical seal: Ceramic-Graphite, Silicon Carbide-Carbide alloy.
Copper winding
2-pole induction motor.
Three-phase:380V-415V/50Hz
Single-phase:220V-240V/50Hz
Single-phase with capacitor and thermal overload protection.
Single phase can add float switch
Other voltages or frequency: 60Hz
Technical Parameter
Structure Chart
The workshops
FAQ
Q1: Are you a factory?
A: Yes. We are a pump factory with more than 20 years professional experience of manufacturing water pumps.
Q2.What is your MOQ of this pump?
A: Our MOQ is a full 20ft container, but we can accept a trial order to check the quality as the first cooperation.
Q3: Is it acceptable to make customers' own brand?
A: Sure, we can do OEM.
Q4: What is your payment term?
A: We usually do 30% T/T deposit and 70% against documents, or L/C at sight.
Q5: How long is your warranty?
A: One year!
Q6: What is the delivery time?
A: 25-30 days after receiving your L/C or T/T deposit.
Applications
The WQD/WQ Series pumps are widely applied in industry, agriculture, mining, construction, municipal, environmental protection, etc. They are suitable for draining water containing particles such us short fibers, paper scraps,etc, and soft solid, such as muddy water, dirty water, domestic wasterwater, sewage, manure, etc. They are ideal equipment for agricultural irrigation and drainage, pool silt cleaning and construction sites, but not apply to the location with explosion-proof requirements.Features
1. Wear-resistant whole cast iron parts design .2. Double channel impeller, good flow capacity, excellent hydraulic performance.
3. The heat treated steel shaft. Carbide double sides mechanical seals.
Operating conditions
Liquid PH: 4~10Maximum liquid temperature: +40ºC
Maximum ambient temperature: +40ºC
Maximum immersion depth: 5m
Liquid kinematics viscosity: 7x10-7~23 x10-6 m2/s
Maximum liquid density: 1.2x103kg/m2
The grain diameter of suspended solids up to 25mm
Motor and Pump
Insulation class: BProtection class: IP68
Pump body: Cast iron
Motor bracket: Cast iron.
Impeller: Cast iron
Motor shaft: The heat treated steel shaft
Mechanical seal: Ceramic-Graphite, Silicon Carbide-Carbide alloy.
Copper winding
2-pole induction motor.
Three-phase:380V-415V/50Hz
Single-phase:220V-240V/50Hz
Single-phase with capacitor and thermal overload protection.
Optional available on request
Special mechanical seals, shaftSingle phase can add float switch
Other voltages or frequency: 60Hz
Technical Parameter
Structure Chart
The workshops
FAQ
Q1: Are you a factory?
A: Yes. We are a pump factory with more than 20 years professional experience of manufacturing water pumps.
Q2.What is your MOQ of this pump?
A: Our MOQ is a full 20ft container, but we can accept a trial order to check the quality as the first cooperation.
Q3: Is it acceptable to make customers' own brand?
A: Sure, we can do OEM.
Q4: What is your payment term?
A: We usually do 30% T/T deposit and 70% against documents, or L/C at sight.
Q5: How long is your warranty?
A: One year!
Q6: What is the delivery time?
A: 25-30 days after receiving your L/C or T/T deposit.
