Audited Supplier
wlfm 87-292-858
CE, ISO
New
Customized
Roof, Wall, Floor, Ceiling
Machinery
Floor Deck Roll Forming Machine
Galvanized Steel,Aluzinc Steel
S45c ,45#Steel with Chrome Treatment
0.8-1.2mm
G450 ~ G550
12 M/Min
22
1 Year
Engineers Available to Service Machinery Overseas
WILLING INT'L
Sea Worthy Fixed by Wire Rope, Wooden Blocks
CE Standard, ISO 9001-2008
China R. P
84552210
Product Description
CE Steel Storage Deck Panel Roll Forming Machine
Components for the Machine:
The roll forming machine consists of 8-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
Technical Parameters
Material of Main Equipment
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Standard Equipment of Machine
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Components for the Machine:
The roll forming machine consists of 8-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
Technical Parameters
| Material Specification | Aluzinc steel and galvanized steel. |
| Thickness | WLFM51-326.5-980, 0.75 mm to 1.5mm; WLFM75-300-900, 0.75mm to 1.50mm. |
| Main Motor Power | 22kw (two sections of machine, each secton has one motor with 11kw). |
| Hydraulic Station Power | 7.5kw. |
| Feeding Width | 1000mm |
| Cover Width | 800mm |
| Steel Stress | G450 ~ G550. |
| Roll Forming Speed | 12 m/minute. |
| Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
| Hydraulic Uncoiler | Max. capacity: 8'000kgs. |
| Coil Inner Diameter | 508mm. |
| Voltage | As per customer's request. |
| Numbers of Stations | 26 stations |
| Type of Cutting | Roll-formed and length-set profile cutting. |
Material of Main Equipment
| Roller Material | High grade S45C forged steel, coated with hard chrome; some important roller wheels are chosen Cr12 mold steel, coated with hard chrome. |
| Active Shaft Material | High grade S45C carbon wrought steel, diameter 85mm. |
| Electric Elements | PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider Electric, Germany. |
| Cutter blades | Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life. |
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Standard Equipment of Machine
| 1) | Manual Uncoiler | 1 set |
| 2) | Infeed Guide | 1 set |
| 3) | Embossing Roller | 1 set |
| 4) | Roll Forming Station | 1 set |
| 5) | Post-cut Equipment | 1 set |
| 6) | Hydraulic Station | 1 set |
| 7) | PLC Control Console | 1 set |
| 8) | Product Support Table | 2 sets |
| 9) | Spare Parts | 1 box |
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
