Audited Supplier
SP-600G/SP-560G
Air Filter
Fiber
Gradual Structure
Air
Shw
Air Filter
SHWFILTER
Plastic Bag
2*20m*22mm/1.6*21m*22mm
Guangzhou, China
59119000
Product Description
SHW Ceiling Filter/ Spraybooth Ceiling Filter /Booth Ceiling Filter/Roof Filter
Mainly products:Pre-filter Media;Spraybooth Ceiling Filter;Paint Stop/Floor Filter;Cell Pockets;Activated Carbon Filter Media;High Temperature Fire-proof Media;Pre/medium-efficiency filter media;Prefilter;Pre Efficiency Pocket Filter;Medium Efficiency Pocket Filter;Heat-Resistance Filter;Medium/Sub-HEPA Filter;HEPA Filter;Chemical Filter;Paint Mist Filter;Purification equipment;Activated Carbon Nonwoven;Activated Carbon Filter.
Product introduction
600G Spraybooth Ceiling Filter
Application:
The series of ceiling filters are mainly used in surface spray-paint industry,Hi-tech electronics,aerospace and other areas.Composited of imported high-performance,anti-broker synthetic fiber in gradual technology;
Type:
SP-600G; JE-600G; "AAA"3A-600G; PE-600G
Speciality:
The outlet side of the filter media is reinforced by import PE-net ,domestic glassfiber net,nylon cloth,domestic non-flammable net.
With gradual technology, the fiber density increases gradually toward pure air, high filter efficiency,extended working life.Due to complete penetration of viscosity in media, dust particles can not pass,fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results.
Conforming to European DIN53438-F1 and American UL900-Class2. The outlet side is printed with EN-779 standard classifications, DIN logo, the registered trademark of SHW. Dense outlet side, the surface is reinforced by covered net scrim,low initial resistance, high dust holding capacity, good fire retardant and long working life, economical and reliable,moisture resistance, up to 100% relative humidity.
Specification:Type | Filter Class | Average Arrestance | Initial Efficiency | Nominal Velocity(m/s) | Rated Airflow(m3/h) | Initial Resistance(Pa) | Final Resistance(Pa) | Dust Holding Capacity(g/m²) | Continuous Temperature(ºC) | Instantaneous Temperature(ºC) | Thickness(mm) | Sizes |
| SP-600G | F5 | 98% | 55% | 0.25m/s | 900 m3/h | 30Pa | 450Pa | 460 g/m2 | 100ºC | 120ºC | 22mm | 1.6*21M |
| 2.0*21M | ||||||||||||
| JE-600G | F5 | 98% | 55% | 0.25m/s | 900 m3/h | 30 Pa | 450Pa | 460 g/m2 | 100ºC | 120ºC | 22mm | 1.6*21M |
| 2.0*21M | ||||||||||||
| 3A-600G | F5 | 98% | 55% | 0.25 m/s | 900 m3/h | 30 Pa | 450 Pa | 460 g/m2 | 100ºC | 120ºC | 22mm | 1.6*21M |
| 2.0*21M | ||||||||||||
| PE-600G | F5 | 98% | 55% | 0.25 m/s | 900 m3/h | 30 Pa | 450 Pa | 460 g/m2 | 100ºC | 120ºC | 22mm | 1.6*21M |
| 2.0*21M |
