Audited Supplier
NRM-1
Ceramic Fiber Blanket
Spray Silk Rug
Ordinary Ceramic Fiber
305 X 305 X305 Mm
160 -240 Kg/M3
Std, HP, Hz, Ultra-H
as Per Order Qty
Contact Us by Phone or Email
NR
First by PP Bags, Then by Cartons
ISO9001
CHINA
68061010
Product Description
Z-Block-ceramic fiber module is made from ceramic fiber blanket stacked with cut edges exposed, a lining system designed for high temperature furnaces that require corrosion barriers on the shell. Ceramic fiber modules are held to the steel casing by stainless steel studs that are welded to the shell before a protective coating is applied. They are designed to meet the thermal insulation requirements of high temperature furnaces. Which are cheaper and easier to install and maintain, much widely used in high temperature furnace and oven insulation.
Characteristics of ceramic fiber module
Low thermal conductivity & heat storage - High temperature stability -Resistance to thermal shock & chemical attack
To be secured by concealed anchor Greater mechanical strength Resistance to gas flow erosion
Shorter heat up and cool down time Flexible and easy to cut or install -Selection of attachment designs
The expansion of module make furnace lining be seamless and can make up the shrinkage of fiber furnace lining to improve heat insulation Excellent tensility, after the construction of furnace lining is completed; The module is at the pre-compressed state;
Lightweight & Asbestos free
Typical Application of Ceramic fiber module
Insulation of furnace lining in petrochemical industry -(Heating, Reformer, Cracking Furnace) - furnace lining in metallurgy industry -furnace lining in ceramics (Shuttle kilns, Tunnel kilns, Kiln cars) - Insulating of furnace lining in glass industry
Insulation of furnace lining for heat treatment furnace in heat treatment industry -Material of furnace lining for Heating, Forging, Annealing Furnaces -Iron and Steel Industry: Reheating furnace, Multi and single stack coil annealing furnaces, Transfer ladle lids, Continuous annealing and coating furnaces, Roll furnace. -Waste heat recovery units, Combustion Chambers, Boiler ductwork.
Add: Lucky Tower B, Dongsanhuan North Road, Chaoyang District, Beijing, China. 100027
Web: http://madeinchina007.en.made-in-china.com
Characteristics of ceramic fiber module
Low thermal conductivity & heat storage - High temperature stability -Resistance to thermal shock & chemical attack
To be secured by concealed anchor Greater mechanical strength Resistance to gas flow erosion
Shorter heat up and cool down time Flexible and easy to cut or install -Selection of attachment designs
The expansion of module make furnace lining be seamless and can make up the shrinkage of fiber furnace lining to improve heat insulation Excellent tensility, after the construction of furnace lining is completed; The module is at the pre-compressed state;
Lightweight & Asbestos free
Typical Application of Ceramic fiber module
Insulation of furnace lining in petrochemical industry -(Heating, Reformer, Cracking Furnace) - furnace lining in metallurgy industry -furnace lining in ceramics (Shuttle kilns, Tunnel kilns, Kiln cars) - Insulating of furnace lining in glass industry
Insulation of furnace lining for heat treatment furnace in heat treatment industry -Material of furnace lining for Heating, Forging, Annealing Furnaces -Iron and Steel Industry: Reheating furnace, Multi and single stack coil annealing furnaces, Transfer ladle lids, Continuous annealing and coating furnaces, Roll furnace. -Waste heat recovery units, Combustion Chambers, Boiler ductwork.
Size Chart for Ceramic Fiber Module
| Classification Temperature Theoretical Density | Ceramic Fiber Module 2300°F (1260°C) | Ceramic Fiber Module 2600°F (1427°C) |
| In Stock Sized | 12 x 12 x 6 in 12 x 12 x 8 in 12 x 12 x 10 in | 12 x 12 x 6 in |
| Theoretical Density | 12.5 - 13.7 (lb/ft³) 200 - 220 (kg/m³) | 12.5 - 13.7 (lb/ft³) 200 - 220 (kg/m³) |
| Shrinkage on heating (%) | 1000°C X 24H <= -3 | 1350°C X 24H <= -3 |
Ceramic Fiber Module Data Sheet Chart:
Description | STD Module | HP Module | HZ Module |
Chemical Composition (%) | |||
Al2O3 | ≥44 | ≥45 | ≥34 |
SiO2 | ≥52 | ≥54 | ≥50 |
Fe2O3+TiO2 | ≤1.0 | ≤0.5 | ≤0.5 |
ZrO2 | - | - | ≥15 |
K2O+Na2O+Fe2O3 | ≤1.0 | ≤0.2 | ≤0.2 |
Physical Properties | |||
Density (kg/m³) avg | 220 | 220 | 220 |
Classification Temperature (°C) | 1260 | 1260 | 1430 |
Liner Shrinkage after Heating (%) | 1000°Cx24h≤2.5 | 1100°Cx24h≤2.5 | 1350°Cx24h≤3.5 |
Thermal Conductivity (W/mK) | |||
400°C | 0.090 | 0.101 | 0.118 |
500°C | 0.119 | 0.120 | 0.149 |
600°C | 0.152 | 0.175 | 0.172 |
Excellent Features
- Modules combine the insulating advantages and excellert features of ceramic fiber
- Excellent thermal shock resistance
- Low heat storage capacity
- Rapid and easy installation
- Provide durable service and lifespan
- Lightweight
Typical Applications:
Ceramic fiber module for ceramic industry
- Low mass kiln cars
- Continuous and batch kilns
- Door linings
- Glazing, porcelain furnace linings
Ceramic fiber module for power generation
- Duct lining
- Heat recovery
- Steam system
- Boiler insulation
- Stack linings
Ceramic fiber module for steel industry
- Ladle pre-heaters and covers
- Heat treat furnace
- Soaking pit covers and seals
- Heaters and reformer lining
Ceramic fiber module for other applications
- Incineration equipment
- Burner blocks
- Induction furnace covers
- Glass tempering furnace
Add: Lucky Tower B, Dongsanhuan North Road, Chaoyang District, Beijing, China. 100027
Web: http://madeinchina007.en.made-in-china.com
