Audited Supplier
scaffolding
Steel
Fixed
Multi-Pole Scaffolding
Combined Scaffolding
Projecting Scaffolding
Full Scaffolding
External Scaffolding
Attached Lifting Scaffolding
Scaffolding Frames
Building Scaffold
Q235,Q345
48.3 mm
3.2 mm
HDG
N/A
Pallets
China
73084000
Product Description
Ringlock scaffolding is a multi-purpose modular scaffold system that can be used for all forms of access and support structures in the building and construction industries, shipbuilding, off-shore construction, and industrial maintenance. And METEC scaffolding consists of galvanized high strength steel modular components that are assembled together using integral wedge connectors. We can also supply a complete range of accessories, including steel planks, side brackets, system toe boards, stairs, ladders, and reinforced ledgers.
As all components are galvanized and built for increased safety, service life, and resistance to damage, they are perfect for all types of applications and industries.
The Ringlock system can accommodate up to eight connections of combined ledger and braces. Each of these connections can safely carry a load of 11.12kN (2500LBS).
The Ringlock system can accommodate up to eight connections of combined ledger and braces. Each of these connections can safely carry a load of 11.12kN (2500LBS).
However, the total sum of the ledger loads must not exceed the recommended leg load for the given bracing situation.
Due to our standards and ledgers are fully welded by machine, the products are clean, flat and seamless. In addition, Our welders are well trained by AWSD1.1 to standardize Butt Joint welding, Semi-Auto Fillet Welding and Auto Fillet Welding.
The full production followed purchased material, cutting tubes, welding, hot-dip galvanized, cleaning and packing. Each step had procedures or guidance for them.
Due to our standards and ledgers are fully welded by machine, the products are clean, flat and seamless. In addition, Our welders are well trained by AWSD1.1 to standardize Butt Joint welding, Semi-Auto Fillet Welding and Auto Fillet Welding.
The full production followed purchased material, cutting tubes, welding, hot-dip galvanized, cleaning and packing. Each step had procedures or guidance for them.
Metec can supply a full set of Ringlock scaffold accessories, and your customized products are also welcomed.
| Diameter: | 48.3 mm |
| Thickness: | 3.2 mm |
| Material: | Q345 or Q235 |
| Finished: | Hot Dip Galvanized |
