Audited Supplier
CL-HFT(KC)
Electrical Winding Insulation,Wind Power
OEM
PE/EVA
Selectable
-45-125
IATF 16949
Carton
Customizable
Changzhou
4009220000
Product Description
Basic information
Product Description
Environment Friendly Heat Shrinkable Tube uses specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.
The properties of environment-friendly, flexibility flame retardant, quick shrink and stable performance make them widely used in the field of electronics, communication, automotive, pipeline protection and so on. It is widely applied for connecting or end-handing, electric wire, insulating and harness of electric wire, corrosion and rust-proof of metallic rods or tubes, gas pipeline and marking for other products.
| Item | CL-HFT | |
| Continuus Temperature Range | -40ºC-125ºC | |
| Radial Shrinking Ratio | 2:1 3:1 | |
| Longitudinal Shrinking Ratio | ±5% | |
| Tensile Strength | ≥10.4MPa | |
| Elongation Ratio | ≥200% | |
| Aging in circulating-air oven | (158±1.0)ºC,7days | |
| After aging | Tensile Strength | ≥7.3MPa |
| Elongation Ratio | ≥100% | |
| Dielectric Voltage Withstand | 600V | |
| Corrosion of Bare Copper | ≥15kV/mm | |
| Flammability | VW-1 | |
| Concentricity | ≥65% | |
Product Description
Environment Friendly Heat Shrinkable Tube uses specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.
The properties of environment-friendly, flexibility flame retardant, quick shrink and stable performance make them widely used in the field of electronics, communication, automotive, pipeline protection and so on. It is widely applied for connecting or end-handing, electric wire, insulating and harness of electric wire, corrosion and rust-proof of metallic rods or tubes, gas pipeline and marking for other products.
| Size | As Supplied | After Recovery | Packing Length | ||
| ID (Inside Diameter) | T(Wall-thickness) | ID (Inside Diameter) | T(Wall-thickness) | (Meter/Roll) | |
| Φ1.5 | 2.00±0.30 | 0.20±0.08 | ≤0.80 | 0.40±0.08 | 200 |
| Φ2.0 | 2.50±0.30 | 0.20±0.08 | ≤1.00 | 0.42±0.08 | 200 |
| Φ2.5 | 3.00±0.30 | 0.22±0.08 | ≤1.25 | 0.42±0.08 | 200 |
| Φ3.0 | 3.50±0.30 | 0.25±0.10 | ≤1.50 | 0.46±0.10 | 200 |
| Φ3.5 | 4.00±0.30 | 0.25±0.10 | ≤1.75 | 0.46±0.10 | 200 |
| Φ4.0 | 4.50±0.30 | 0.25±0.10 | ≤2.00 | 0.48±0.10 | 200 |
| Φ4.5 | 5.00±0.30 | 0.25±0.10 | ≤2.25 | 0.50±0.10 | 100 |
| Φ5.0 | 5.50±0.40 | 0.25±0.10 | ≤2.50 | 0.50±0.10 | 100 |
| Φ6.0 | 6.50±0.40 | 0.28±0.12 | ≤3.00 | 0.56±0.10 | 100 |
| Φ6.5 | 7.00±0.40 | 0.28±0.12 | ≤3.25 | 0.56±0.10 | 100 |
| Φ7.0 | 7.50±0.40 | 0.30±0.12 | ≤3.50 | 0.58±0.10 | 100 |
| Φ8.0 | 8.50±0.50 | 0.30±0.12 | ≤4.00 | 0.60±0.10 | 100 |
| Φ9.0 | 9.50±0.50 | 0.30±0.12 | ≤4.50 | 0.60±0.10 | 100 |
| Φ10 | 10.50±0.50 | 0.36±0.12 | ≤5.00 | 0.72±0.12 | 100 |
| Φ11 | 11.50±0.50 | 0.36±0.12 | ≤5.50 | 0.72±0.12 | 100 |
| Φ12 | 12.50±0.50 | 0.36±0.12 | ≤6.00 | 0.72±0.12 | 100 |
| Φ13 | 13.50±0.50 | 0.36±0.12 | ≤6.50 | 0.72±0.12 | 100 |
| Φ14 | 14.50±0.50 | 0.36±0.12 | ≤7.00 | 0.72±0.12 | 100 |
| Φ15 | 15.50±0.50 | 0.36±0.12 | ≤7.50 | 0.72±0.12 | 100 |
| Φ16 | 16.50±0.50 | 0.36±0.12 | ≤8.00 | 0.72±0.12 | 100 |
| Φ17 | 17.50±0.50 | 0.36±0.12 | ≤8.50 | 0.72±0.12 | 100 |
| Φ18 | 18.70±0.60 | 0.40±0.15 | ≤9.00 | 0.78±0.15 | 100 |
| Φ20 | 20.70±0.60 | 0.40±0.15 | ≤10.0 | 0.80±0.15 | 100 |
| Φ22 | 22.70±0.70 | 0.46±0.20 | ≤11.0 | 0.86±0.15 | 100 |
| Φ25 | 25.70±0.70 | 0.46±0.20 | ≤12.5 | 0.90±0.15 | 50 |
| Φ28 | 29.00±0.70 | 0.46±0.20 | ≤14.0 | 0.95±0.20 | 50 |
| Φ30 | 31.00±1.00 | 0.46±0.20 | ≤15.0 | 1.00±0.20 | 50 |
| Φ35 | 36.00±1.00 | 0.50±0.22 | ≤17.5 | 1.00±0.20 | 50 |
| Φ40 | 41.50±1.50 | 0.50±0.25 | ≤20.0 | 1.15±0.25 | 50 |
| Φ45 | 46.50±1.50 | 0.50±0.25 | ≤22.5 | 1.15±0.25 | 50 |
| Φ50 | 52.00±2.00 | 0.60±0.25 | ≤26.0 | 1.20±0.25 | 50 |
| Φ55 | ≥55.00 | 0.60±0.25 | ≤28.0 | 1.20±0.25 | 50 |
| Φ60 | ≥60.00 | 0.60±0.25 | ≤30.0 | 1.20±0.25 | 50 |
| Φ70 | ≥70.00 | 0.70±0.30 | ≤35.0 | 1.20±0.25 | 50 |
| Φ80 | ≥80.00 | 0.70±0.30 | ≤40.0 | 1.25±0.25 | 25 |
| Φ95 | ≥90.00 | 0.70±0.30 | ≤45.0 | 1.45±0.25 | 25 |
| Φ100 | ≥100.00 | 0.70±0.30 | ≤50.0 | 1.45±0.25 | 25 |
Special specifications, wall thickness can be customized.
