










Description | Benchmark | Unit | Figures |
Total thickness | EN 428 | mm | 2.0 |
Weight | EN 428 | g/sqm | 2700 - 3150 |
Width | EN 428 | m | 2.0 |
Coil length | EN 428 | m | 20 |
Classification
Flame Retarance | GB 8624 - 1997 | B1 level |
Toxic testing | GB 18586 - 2001 | Good |
Electrical resistance | EN 1081 | >109-10 |
Anti-slip resistance (Dry) | EN 13893 | ≥0.3 |
Anti-slip resistance (Wet) | EN 51130 | R9 |
Performances
Abrasion | EN 649 | T |
Castor wheel test | EN 425 | Satisfied |
Colour fastness | EN 20105-B02 | ≥6 |
Chemique resistance | EN 423 | Good |
Demensioanl stability | EN 434 | ≤0.40 |
Flexibility | EN 435 | Excellent |
Hygiene treatment | MRSA | Good |
Sound reduction | EN ISO 717/2 | App ~ 4db |
Anti biosis | EN 846 | Anti |
Indentation | EN 433 | ~ 0.05 mm |
Residual indentation | EN 433 | ~ 0.04 mm |
Thremal insulation | EN 12524 | Suitable |
Surface treatment | PUR/UV |
Installation should be carried in accordance with local standards. Subfloor to be smooth, hard, clean and dry prior to laying.Where applicable the subfloor must incorporate an effective Damp Proof Membrane. The material must be allowed to acclimatize 24 hours before installation in a room temperature of between 18 - 24 degree.
Maintenance
No emulsion dressing is required. Maintenance should be carried out regularly to retain in the appearance and durability of the floor. The floor covering should be maintained with regula sweeping and damp mopping with using a neutral cleaner, more intense cleaning should be carried out using a fine spray cleaning pad under a floor machine, or for larger area with a cleaning machine.