Audited Supplier
Check valve for valve block
Model:CXFA-XAN
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity T-5A Series 2 Capacity 40 gpm Maximum Operating Pressure 5000 psi Maximum Valve Leakage at 110 SUS (24 cSt) 1 drops/min. Valve Hex Size 1 1/8 in. Valve Installation Torque 45 - 50 lbf ft Model Weight 0.41 lb.
FAQ:
There are exactly 250 we drops in a cubic inch or 15 in a cc.
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve,our direct acting valves are very fast, dirt tolerant, stable, and robust. Pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.
COMPANY PROFILE
Our company in Shanghai, China. Workroom 1500 square meters.
We have 20 years experience of hydraulic spare parts. We repair and offer hydraulic spares parts (hydraulic motor/hydraulic pump/hydraulic valves/rubber hose/cylinder/ brake disk/crane parts/presure guage ect. )for vessel deck crane and other equipment.
Shanghai Sinu Marine Technology Co., Ltd, mainly provides deck hydraulic machinery for ship owners, shipping companies, shipping companies, automobile manufacturers, ship repair shops and other users, such as: Hydraulic motors, hydraulic pumps, hydraulic valves, pressure gauges, Hydraulic hoses, crane hydraulic spare parts, ship hatch cover hydraulic spare parts.Main products is T6C,T6EE,T7EEC/A10VSO/A4VG/A7V/6N67/HVL series ect.
Also, we offer repair service on board.
Welcome to contact us.
FAQ
1. who are we?
We are based in Shanghai, China, start from 2020,sell to Western Europe(50.00%),South Asia(10.00%),Northern Europe(10.00%),Mid East(10.00%),Eastern Asia(10.00%),Southern Europe(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
hydraulic motor,hydraulic pump,hydraulic vales,hydraulic cylinder,hydraulic spares,deck crane spares,rubber hose,ect.
4. why should you buy from us not from other suppliers?
We have 20 years experience of hydraulic spare parts. We repair and offer hydraulic spares parts (hydraulic motor/hydraulic pump/hydraulic valves/rubber hose/cylinder/ brake disk/crane parts/presure guage ect. )for vessel deck crane and other equipment.
5. what services can we provide?
Accepted Delivery Terms: EXW;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese
6.How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
7.Do you have any guarantee on the quality of your products?
As long as the pumps&motor&valves and all products are from Sinumarine, we promise that the minimum period quality assurance is one year. If the products have any problem on quality within this period, we all provide exchange service. If they have been installed, inconvenient to be exchanged, we will provide technical personnel to help solve the problem.
8.If we have a large quantity of goods, can you give us a discount?
We provide unified wholesale price to customers. No matter you buy one or hundreds of goods, we try our best to give you benefit, because we want to establish long-term cooperation relationship with you.
PACKING & DELIVERY:
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
