WZSS MBR
Lifetime After-Sales
1years
Sewage Treatment Equipment
Biological Treatment
Industrial, Home, Agriculture, Hospital
Plastic Bag
2000*630*36mm
PVDF with Pet Lining
1.0/2.2mm
10-40L/M2.Hour
0.03 ~0.04um
2-11
More Than 3 Years
200000 Meter/Meters Per Month Sewage Treatment Mbr
Wanze Shengshi
Container
1.5*2*2.5M
China
8421219990
Product Description
Membrane BioreactorMBR (Membrane BioreactorMBR) is a new high-efficiency wastewater treatment process that combines high-efficiency membrane separation technology with the traditional complete activated sludge process. It replaces the secondary sedimentation pool in the traditional activated sludge process with membrane components. The large number of microbial flora in the interception biological system promotes the accumulation of microbial flora and biological species in the system, improves the sewage treatment capacity and efficiency, and thus greatly improves the effluent quality and volume load of the system, and the effluent can be used as secondary water.
Membrane material | Poly vinylidene fluoride(PVDF with Reinforced lining) | |
Membrane Pore size | 0.034-0.1µm | |
Membrane fiber (ID/OD) | 1.0/2.2mm, 0.8/1.9mm,1.0/2.0mm | |
Filter method | Negative pressure suction mode | |
TPM(Max) | 50Kpa | |
PH Range | 2-11 | |
Temperature Range | 5-40ºC | |
MLSS Range | 4000-12000mg/L (min:3000mg/L, max:15000mg/L) |
Model | MBR6 | MBR10 | MBR15 | MBR-20 | MBR-35 | ||
Element size | A*b*D(mm) | 600*760*40 | 630*1000*36 | 630*1500*36 | 630*2000*36 | 844*2198*49 | |
Connection | Ф25 | Ф32 | Ф32 | Ф32 | Ф32 | ||
Element parameters | Effective membrane area | 6m² | 10m² | 15m² | 20m² | 35m² | |
Pore size | 0.03~ 0.1µm | ||||||
Material | PVDF( PET lining) | ||||||
Water catchment mode | Both ends of the catchment | ||||||
Filtration mode | Negative pressure suction | ||||||
Operating conditions | TMP | 0.02~0.05Mpa | |||||
MAX Backwash pressure | 0.1Mpa | ||||||
Water temperature | 10~45ºC | ||||||
Running PH tolerance range | 5~9 | ||||||
Cleaning PH tolerance range | 2~10 | ||||||
Aeration rate(Nm³)/ projected area | 15:1~20:1 | ||||||
Performance | Produced water | Turbidity <0.3NTU SS≈0 SDI<4 | |||||
Working life | ≥ 5 years under normal usage | ||||||
Model | WZ-MBR-II15 | WZ-MBR-II30 | ||
Element size | a*b | 1250mm*1300mm | 1250mm*2000mm | |
Connection | Ф32 | Ф32 | ||
Element parameters | Efective membrane area | 15m² | 30m² | |
Pore size | 0.03~ 0.1µm | 0.03~ 0.1µm | ||
material | PVDF membrane with PET support tube & ABS cartridge | |||
Method of integration | Both ends of the catchment | |||
Filtration mode | Negative pressure suction by submersed membrane | |||
Operating conditions | Operation pressure range | 0.02~0.05Mpa | ||
MAX Backwash pressure | 0.1Mpa | |||
Temperature | 10~45ºC | |||
Run PH tolerance range | 5~9 | |||
Clean PH tolerance range | 2~10 | |||
Aeration rate(Nm³)/ projected area | 100-150 m/h | |||
Performance | Produced water turbidity | Turbidity <0.3NTU SS≈0 SDI<4 | ||
Working life | ≥ 5 years under normal usuage | |||
