Audited Supplier
GT-25+65+35MM
Electric
New
ISO, CE
12 Months
Single-Screw
Siemens and Omron
Siemens
Japan-NSK
Siemens
Blue, Green, Red.... According to Customer R
High Precision
Electric
38crmoala with Nitrided Surface
Max.200m/Min
GOLDEN TECHNOLOGIES
Wooden Packing or PE Film Simple Packing
International standard
China
84772090
Product Description
(1)APPLICATION:
1. Process material: FM-PE,PE.
suitable for copper conductor skin-Foam-Skin physical foaming three layer co-extruded insulation precision extrusion;
2.This production line is composed of the Nitrogen injection machine for foaming,
the precise triple layer crosshead, and on-line testing device for capacitance and eccentricity.
It is mainly for making coaxial cable.
(2)FEATURES:
1. Max. Foaming degree: 75 %( PE data cable foaming degree can not exceed 50%; PE mini coaxial cable can not exceed 60%).
2.Testing online device: insulated out diameter, capacitance testing, concentricity testing and ZUNBACH control & monitor system.
3.The optimization design,of model large lenth diameter ratio of screw,with good foam,plastic completely etc.,
4.Extrusion products concentricity diameter tolerance of 95%,+/-0.008,capacitance +/-0.5; Temperature +/-1 degree.
(3)COMPONENTS:
(4)ABOUT US
1. We produce all kinds of cable / wire making / processing equipment and accessories.
2. We are the leading manufacturer of any kinds of complete wire and cable extrusion line in China since 2004.
3. We supply Site service: Install / debug / repair
4. Our machine has exported to over 60 different countries,like Germany,Poland,Italy,Russia,etc.
5. We electrical parts are used the international qualified brand, like Siemens, ABB, etc.
(5)HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2.Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1 hour by car from Shenzhen airport to our factory.
1. Process material: FM-PE,PE.
suitable for copper conductor skin-Foam-Skin physical foaming three layer co-extruded insulation precision extrusion;
2.This production line is composed of the Nitrogen injection machine for foaming,
the precise triple layer crosshead, and on-line testing device for capacitance and eccentricity.
It is mainly for making coaxial cable.
(2)FEATURES:
1. Max. Foaming degree: 75 %( PE data cable foaming degree can not exceed 50%; PE mini coaxial cable can not exceed 60%).
2.Testing online device: insulated out diameter, capacitance testing, concentricity testing and ZUNBACH control & monitor system.
3.The optimization design,of model large lenth diameter ratio of screw,with good foam,plastic completely etc.,
4.Extrusion products concentricity diameter tolerance of 95%,+/-0.008,capacitance +/-0.5; Temperature +/-1 degree.
| Model | 25+40+30 | 25+65+35 | 30+80+40 |
| Pay-off bobbin dia(mm) | 400-500 | 500-630 | 800-1000 |
| Pay-off | Motorized | ||
| Conductor Diameter(mm) | 0.2-0.8 | 0.4-2.0 | 0.5-2.27 |
| Finished Diameter(mm) | 0.5-1.5 | 1.2-5.0 | 4-14 |
| Take-up bobbin dia | 500-630 | 630-800 | 800-1000 |
| Electrical control | Inverter+PLC touch screen | ||
(3)COMPONENTS:
| QTY. | Unit | Name of product | Type/Note | Manufacturer |
| 1 | Set | Pay Off | GOLDEN | |
| 1 | Set | Drawing Machine | GOLDEN | |
| 1 | Set | Annealer | GOLDEN | |
| 1 | Set | preheater | GOLDEN | |
| 1 | Set | 35MM extruder | GOLDEN | |
| 1 | Set | 65MM Main Extruder | GOLDEN | |
| 1 | Set | 25MM Co- Extruder | GOLDEN | |
| 1 | Set | Moveable trough | GOLDEN | |
| 3 | Parts | Single Layer Cooling Trough | GOLDEN | |
| 1 | Set | Independent cold Water Tank | GOLDEN | |
| 1 | Set | Multi-Layer Cooling Capstan | GOLDEN | |
| 1 | Set | Pneumatic Tension Accumulator | GOLDEN | |
| 1 | Set | Take Up | Full -automatic | GOLDEN |
| 1 | Set | Main Control Box | GOLDEN |
(4)ABOUT US
1. We produce all kinds of cable / wire making / processing equipment and accessories.
2. We are the leading manufacturer of any kinds of complete wire and cable extrusion line in China since 2004.
3. We supply Site service: Install / debug / repair
4. Our machine has exported to over 60 different countries,like Germany,Poland,Italy,Russia,etc.
5. We electrical parts are used the international qualified brand, like Siemens, ABB, etc.
(5)HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2.Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1 hour by car from Shenzhen airport to our factory.
