Audited Supplier
AM
3 Years
3 Years
110m-150m
>400 L/min
Motor&Diesel Engine
Single-Stage Pump
High Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Closed
Pump
Centrifugal Slurry Pump
From 1 Inch to 24 Inch
Abrasive Resistant Pump
10 - 5400 M3/Hr
5 - 125 M
Gland Seal, Expeller, Mechanical Seal
High Cr Mo Ni Alloy and Rubber Liner
Electric Motor and Diesel Engine
Available
Blue, Yellow, Grey etc.
An Pump Machinery
Standard Export Wooden Case
ISO, SGS, CE
Shijiazhuang City, China
861370
Product Description
China Centrifugal Slurry Pump Single-stage Electric Slurry Pump
General
AM series is horizontal, cantilevered centrifugal slurry pump, with reasonable construction, reliable operation, long service life. It is widely used in transporting abrasive or / and corrosive slurry in mining, metallurgy, electric power, coal, chemicals, building, etc. Especially well accepted by coal / chrome washing plant, mineral processing plant, power plant etc.
Design Features
Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
One-piece frame - A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for
easy adjustment of impeller clearance.
AM Slurry Pump Structure
| Metal liner | Rubber liner | ||
| 1 | Volute liner | 1 | Frame plate |
| 2 | Frame plate | 2 | Expeller ring |
| 3 | Frame plate liner insert | 3 | Gland assembly |
| 4 | Cover plate | 4 | Shaft sleeve |
| 5 | Throat bush | 5 | Expeller |
| 6 | Impeller | 6 | Frame plate liner |
| 7 | Expeller ring | 7 | Impeller |
| 8 | Shaft sleeve | 8 | Cover plate liner |
| 9 | Expeller | 9 | Cover plate |
| 10 | Bearing assembly | Note: Slurry pumps have Throat Bush from 4" | |
AM Slurry Pump Performance Data
| Model | Max Power (kw) | Material | Clear water performance | Impeller Vane No. | |||
| Liner | Impeller | Capacity Q ( m3/h) | Head H ( m) | Speed n (rpm) | |||
| 1.5/1B-AM | 15 | M | M | 12.6~28.8 | 6~68 | 1200~3800 | 5 |
| RU | RU | 10.8~25.2 | 7~52 | 1400~3400 | 3 | ||
| 1.5/1B-AMH | 30 | M | M | 16.2~34.2 | 25~92 | 1400~2200 | 5 |
| 2/1.5B-AM | 15 | M | M | 32.4~72 | 6~58 | 1200~3200 | 5 |
| RU | RU | 25.2~54 | 5.5~41 | 1000~2600 | |||
| 3/2C-AM | 30 | M | M | 39.6~86.4 | 12~64 | 1300~2700 | 5 |
| RU | RU | 36~75.6 | 13~39 | 1300~2100 | |||
| 4/3C-AM | 30 | M | M | 86.4~198 | 9~52 | 1000~2200 | 5 |
| 4/3D-AM | 60 | ||||||
| 4/3C-AM | 30 | RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 5 |
| 4/3D-AM | 60 | ||||||
| 4/3E-AMH | 120 | M | M | 126~252 | 12~97 | 600~1400 | 5 |
| 6/4D-AM | 60 | M | M | 162~360 | 12~56 | 800~1550 | 5 |
| 6/4E-AM | 120 | ||||||
| 6/4D-AM | 60 | RU | RU | 144~324 | 12~45 | 800~1350 | 5 |
| 6/4E-AM | 120 | ||||||
| 6/4F-AMH | 260 | M | M | 100~414 | 34~98 | 600~1000 | 5 |
| 8/6E-AM | 120 | M | M | 360~828 | 10~61 | 500~1140 | 5 |
| 8/6E-AM | 120 | RU | RU | 324~720 | 7~49 | 400~1000 | 5 |
| 10/8ST-AM | 560 | M | M | 612~1368 | 11~61 | 400~850 | 5 |
| RU | RU | 540~1188 | 12~50 | 400~750 | |||
| 10/8E-MM | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 5 |
| 10/8E-MM | 120 | RU | RU | 540~1188 | 10~42 | 500~900 | 5 |
| 12/10ST-AM | 560 | M | M | 936~1980 | 7~68 | 300~800 | 5 |
| M | M | 720~1620 | 7~45 | 300~650 | |||
| 14/12ST-AM | 560 | M | M | 1260~2772 | 13~63 | 300~600 | 5 |
| RU | RU | 1152~2520 | 13~44 | 300~500 | |||
| 16/14ST-AM | 560 | M | M | 1368~3060 | 11~63 | 250~550 | 5 |
| 16/14TU-AM | 1200 | ||||||
| 18/16ST-AM | 560 | M | M | 2160~5040 | 8~66 | 200~500 | 5 |
| 18/16TU-AM | 1200 | ||||||
| 20/18TU-AM | 1200 | M | M | 2520~5400 | 13~57 | 200~400 | 5 |
Applications
Chemical Process
Heavy Minerals
Paper and Pulp
Mill Discharge
Sugar Beet
Slag Granulation
Bottom Boiler and Fly Ash
Cyclone Feed
Power Utilities
QA&QC
Reliable and comprehensive quality assurance system ensures the excellent quality of our products. We have got the "International Standard" certification, manufactured according to GB, Department of superscript, and industry standards, we implement a comprehensive quality management during the entire process of production, in accordance with the process file processing strictly, and a variety of detection methods etc.
We have meet the requirements of GB3216-89 national Class B accuracy, <>, computer test data monitoring of water test pumping station application. There are physical chemistry laboratories, and metallographic analysis rooms in our factory, for testing material properties in different respects.
1. Quality Policy
Advocates quality is the life of enterprise, assiduous, the pursuit of excellence
2. Quality objectives
qualified products rate 99%, factory qualified pass rate: 100%
3. Quality Commitment
1) We will continue to improve the awareness of quality, implementing as GB/T19001-2000 quality assurance model standard, meeting technical requirements stipulated in the contract. We are not only discharged for the supplier host, but also for the quality of spare parts, external assistance products etc.
2) We promise the delivery time stipulated in the contract.
